|
Title: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 01, 2019, 05:05:21 PM 1 cell of my 3s lipo shows 0.4 volts it happened when I stopped using that lipo for a month(about 15 days). other two cells are perfect
do anybody have solution to charge that lipo?¿???¿? Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 02, 2019, 08:46:19 PM Should I post this in "rc general topics" because nobody replies here
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: Mehul Anand on February 02, 2019, 10:17:15 PM Well the question is do you want to save money and take risk or dump the battery.
If you want to save your lipo then you could revive that cell just Google lipo rescue or how to revive a cell of a lipo. BUT SEE WHETHER THAT CELL IS PUFFED? if yes than dump the battery. To dump a battery put it in a concentrated solution of salt and Water for a day or till you don't have any voltage. You could also use a bulb to discharge it. Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 02, 2019, 11:20:25 PM It's not puffed at all
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: Mehul Anand on February 02, 2019, 11:21:09 PM Decision upon you revive it or dump it.
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 02, 2019, 11:24:24 PM I'll revive it
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: saurabhhsrivastavaa on February 03, 2019, 09:59:35 AM If you wanna revive it,
Using the balance lead, charge the affected cell using NiMh menu between 0.2 to 0.5 amps for 10 mins. Keep an eye on the voltage during this phase. If the cell is ok, it should jump the voltage soon to acceptable limits like 2.9 to 3 volts. Once the voltage reaches 3.2 volts or so, unplug and balance charge it using the lipo menu. This will work only if the cell is revocable. Do not leave the setup unattended during this process. Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 03, 2019, 10:06:25 AM Thanks for your kind help
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 06, 2019, 06:55:07 AM I charged that particular cell for it could hardly get to 1.5 volts then I unplugged it. After 5 minutes voltage reduced to 0.8 volts
Lipo wasn't that hot but little. Can I revive it?? Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: saurabhhsrivastavaa on February 06, 2019, 07:33:38 AM Please charge it upto 3.2 volts. It may take more time but that's fine. You can increase the amps a bit. If your cell can't reach 3.2 volts, then you may consider it dead.
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 06, 2019, 07:34:33 AM Fine I'll try
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 13, 2019, 08:21:48 PM It reaches 3.6 volts easily but when I put it in balance charging it jumps back to 1.some volts somebody help me
I guess I should not keep on balance charging so I'll try charging it separately Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on February 15, 2019, 09:51:24 AM Guys I can't charge it
Can anybody tell me what to do Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: HANZAla PATEL on March 01, 2019, 02:03:16 PM Help me
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: Mehul Anand on March 01, 2019, 02:22:15 PM you cant do anything..
Title: Re: 1 cell of my 3s lipo shows 0.4 volts Post by: saurabhhsrivastavaa on March 01, 2019, 10:39:50 PM It reaches 3.6 volts easily but when I put it in balance charging it jumps back to 1.some volts somebody help me Sorry to say but your that particular cell is damaged beyond repair. Consider replacing the entire batteryI guess I should not keep on balance charging so I'll try charging it separately |