i have a charger need to know if it is ok to chare lipo batterys with it ive been charging 800mah 2s http://rc4all.co.in/product_info.php?cPath=21_127&products_id=611with no problem so far wanted to knw if i can charge a 180mah battery with it http://hobbyking.com/hobbyking/store/__23135__Turnigy_nano_tech_180mah_2S_25_40C_Lipo_Pack.html ans what is the lowest and highest mah it could charge below are the specs and pics please let me know b4 i destroy my batterys and cause injuries,
i have also put the plug from a computer(pic 3 below) to the charger, to charge the batterys please let me know if thts fine
name-ansmann
type- powerjack li 2-3
use-  li-on/lipo
      batterpacks 2/3
charger characteristic-cccv
safetytimer- aprox 600min
aindicators-led red charging,led green maind,led yellow 11.1v
input- 100-200v +/-10%
           50/60hz
output-7.4(8.4)11.1(12.6)VDC
charging current- 700/600mA

pic 1 has the following mentioned on the charger it self
lithium-ion battery charger
pri-100.240v 50/60hz
sec- 8.4  700ma
      12.6v  600ma / 7.56v amax

If that is fixed and if it cannot be reduced you cannot charge it in case of a normal 180mah battery since 180mah battery at 1C can be charged at 180mA only. However you nanotech 180 mah battery can be charged if it is 5C charge capable which nanotech are mostly.

You should not charge any LiPo at over 1C (that is the mAh value in Amps, 180mAh at max 180mA and so on), though it could be done but shortens the life of the battery. Since your charger outputs 600-700mA, you should only charge batteries over 600mAh capacity to be safe. Only the charging time would be longer for higher mAh batteries.

no sir i dont think i can reduse charging current- 700/600mA on the charger, k so as i understand with this charger i can only charge batteries above 600mah was planning to buy 450mah http://rc4all.co.in/product_info.php?cPath=21_127&products_id=614

how would u know or see it,were is it mention

Bigger bty have it mentioned in your case I will quote specs

Higher capacity during heavy discharge. More than 90% at 100% C rate.-Fast charge capable, up to 15C on some batteries.which may not to true knowing hobbyking

Do not charge your batteries over 1c. I have tried charging a nano-tech (5C capable) at 2.5C and it puffed up. Get a decent charger. The HK eco6 is a good beginner charger.

this charger was from germany the german guy at the hobby shop made this kind of extensions for the charger  with JST said could charge batterys directly i was using it with 800mah http://rc4all.co.in/product_info.php?cPath=21_127&products_id=611 so far it still charges fine ,what i dont understand is why the guy made this JST plug said it will work on small batterys i guess only the smaller batterys have this plug also.

i also had braught another charger for charging my the futaba t6ex specs below
tx charger
ansmann racing
pri-230v 50hz 16,5w
sec-tx:11.2v - 200mah
r/c: 8.4v -500ma
it is not mention what kind of batterys can be charged so im not sure if can charge lipo and if i can what should b the minimium mah is it 200mah or 500mah