sir i am charging the battery with black and red wire. the battery is 3s 1300mah till how much volt i have to charge it.
If you are using the HK charger, please follow these steps:
1.) Electrify the charger.
2.) Go to Lipo charge menu using "stop/end" and "Dec" buttons. Press start once.
3.) you should have "Lipo charge" on the screen.
3.) Now Connect the battery 'red' and 'black' wires to the positive and negative terminals respectively.
4.) Press "start" once and then choose the number of cells as 3 and set the current to 1.3Amps
5.) Press "start" long to start the process.
The charger will stop automatically once the battery is charged. You need not worry about the voltage. The voltage on a fully charged 3cell lipo pack is 12.6V