|
Title: problem with my imax B6! Post by: RAHUL QUADY on March 12, 2018, 12:40:38 PM Hello guys,I am having a trouble with my B6 charger.I have a 3s 2200mah 11.1v lipo and when ever I am setting it to 1.0A(that's how i used to charge),I am getting an error.I don't know why this is happening,so I decreased the value to 0.5A,its working fine without any "input vol errors"!!!!.But this is of no help to me,it takes hours for me to charge a single lipo.Please help me out on this one guys!!!,please!!!!!!
Title: Re: problem with my imax B6! Post by: Aravind298 on March 12, 2018, 12:46:43 PM Your input power supply cannot provide 1A continuous at 12.6V. That's why.
Get a better power supply. Title: Re: problem with my imax B6! Post by: sandyx on March 12, 2018, 03:11:09 PM Get a 12v 5A power supply. Good quality Sagem units are available on ebay India.
Title: Re: problem with my imax B6! Post by: RAHUL QUADY on March 12, 2018, 04:59:18 PM Is that it ?,so there is something wrong with my adapter.I have an adapter,and i have been using it for the past 9 months,and it never behaved like this.my adapter specifications-
INPUT-AC100-240V OUTPUT-12VDC ______------_____1Amp Title: Re: problem with my imax B6! Post by: K K Iyer on March 12, 2018, 05:54:39 PM It's not able to sustain the rated 1amp output because it is:
1. Getting old 2. Getting hot At least that's my experience Title: Re: problem with my imax B6! Post by: prabal276 on March 12, 2018, 06:13:54 PM I too think that the power supply is to blame. Maybe it's not performing at peak efficiency now. The reason being, as stated by Iyer Sir, age and heat.
I tested my old power supply. Similar thing happens with it. When I try to charge me batteries at 2amp rate, it cuts off and the charger quits. Try upgrading your power supply to 2-3 amps or if you can manage, 5 amps. If you manage to get hold of a 12v 5amp supply, it can also be used for hot wiring foam wings. ;D Regards Title: Re: problem with my imax B6! Post by: RAHUL QUADY on March 17, 2018, 02:27:34 PM you are right guys,i replaced my adapter with a toshiba charger,which gives 3A as output.And my charger works without any errors!,thanks alot guys!
|