Title: How to use Toolkit M7 to charge 2 x AA NiMH batteries Post by: sim_tcr on July 16, 2022, 09:25:42 AM Hello,
I have 2 x Duracell Rechargeable AA 2500mAh NiMH batteries and had been charging them using dedicated NiMH charger. Recently that broke. I have a ToolKit M7 charger, which has NiMH mode and want to see if I can use that to charge these batteries. I will use 2 x 1.5V AA battery holder two put the batteries. Do I simply have to connect the red and black wire of holder to Toolkit M7's output and charge? And the charge settings of NiMH mode shows, Cells - Auto (I can set cell count manually too) Nixx Peak - 5mV (I can lower or increase this) Carge Current - 3.8A (I can lower or increase this) Is this good? Thanks. Title: Re: How to use Toolkit M7 to charge 2 x AA NiMH batteries Post by: sim_tcr on July 17, 2022, 09:31:48 PM I end up charging at 0.5A and charger showed it loaded 2600mah and took around 5 hours.
Battery temperature reached 40 degree Celsius at end of charging. I hope it’s good. |