What should be the Specification of battery if I want to make Quadcopter with 30A ESC and 1000KV BLDC motor I am using KK 2.1.5 Flight Controller, right now I have Li-Po battery of "11.1 V ; 25 C ; 2200 mah". But Quadcopter is not working all four bldc motor stops at full throttle and FC restarts.
P.S. This is my first post so please forgive me for any mistake.
Welcome to the forum.
Please clarify whether one 30A Esc, or four.
Which motors? Which props? Their current draw with the props you are using?
If you are using ONE Esc of 30A, and each motor draws say 10amps, the Esc will be overloaded.
If you are using 4 30a Escs and each motor draws 20 amps, your lipo is overloaded.
Don’t worry about first post. Your post is fine. Only more data reqd for a meaningful answer.
Best wishes.