RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: September 21, 2018, 03:14:27 PM »
Tnmy57
Plane Lover
Active Member
**

Reputation Power: 0 
Tnmy57 has no influence.
Offline Offline

City: Asanasol
State: West Bengal
RC Skills: Intermediate
Posts: 9
Join Date: Sep, 2017




I need to recalibrate the esc everytime when i disconnect the receiver and battery and try to power up after a successful calibration. Please Help !

Sent from my SM-G925I using Tapatalk
Logged
 

Read
« Reply #1 on: September 24, 2018, 07:35:02 PM »
Tnmy57
Plane Lover
Active Member
**

Reputation Power: 0 
Tnmy57 has no influence.
Offline Offline

City: Asanasol
State: West Bengal
RC Skills: Intermediate
Posts: 9
Join Date: Sep, 2017



Anyone Huh?

Sent from my SM-G925I using Tapatalk
Logged
 

Read
« Reply #2 on: September 24, 2018, 08:08:07 PM »
ambattuhari
Plane Lover
Senior Member
***

Reputation Power: 2 
ambattuhari has no influence.
Offline Offline

City: Kottayam
State: Kerala
RC Skills: Intermediate
Posts: 175
Join Date: Oct, 2017



More details will help.
Which ESC ?
Motor ,  battery ?
How you are doing the calibration .
And how you came to that conclusion.
Logged
 

Read
« Reply #3 on: September 24, 2018, 09:13:21 PM »
Tnmy57
Plane Lover
Active Member
**

Reputation Power: 0 
Tnmy57 has no influence.
Offline Offline

City: Asanasol
State: West Bengal
RC Skills: Intermediate
Posts: 9
Join Date: Sep, 2017



Using racerstar 1400kv motor with simonk 30A esc and 1500 mAh 3 cell 30C https://uploads.tapatalk-cdn.com/20180924/fa782a5692bf90e1a4be2b34654288eb.jpg
CALIBRATION FAIL !!


Sent from my SM-G925I using Tapatalk
Logged
 

Read
« Reply #4 on: September 24, 2018, 09:17:22 PM »
Tnmy57
Plane Lover
Active Member
**

Reputation Power: 0 
Tnmy57 has no influence.
Offline Offline

City: Asanasol
State: West Bengal
RC Skills: Intermediate
Posts: 9
Join Date: Sep, 2017



Doing the calibration by powering on the transmitter after giving full throttle and then connecting the battery to the esc after successful beep sound , lowering the throttle to set the low value and after the calibration it works fine at that moment but after disconnecting the battery motor is not working.
Recalibration is required.

Sent from my SM-G925I using Tapatalk
Logged
 

Read
« Reply #5 on: September 24, 2018, 11:04:50 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012




Doing the calibration by
1. powering on the transmitter after giving full throttle
2. then connecting the battery to the esc
3. after successful beep sound 
4. lowering the throttle to set the low value
Did you get a beep indicating registration of low throttle?

5. and after the calibration it works fine at that moment but after disconnecting the battery motor is not working. Recalibration is required.
What happens the next time you power the Rx?
No response to throttle?
What is the indication that it needs recalibration?
Is the throttle at low when connecting power to Rx?

Do you have another Esc to try with and see if the problem persists?


Logged
 

Read
« Reply #6 on: September 25, 2018, 08:22:31 AM »
Tnmy57
Plane Lover
Active Member
**

Reputation Power: 0 
Tnmy57 has no influence.
Offline Offline

City: Asanasol
State: West Bengal
RC Skills: Intermediate
Posts: 9
Join Date: Sep, 2017




Doing the calibration by
1. powering on the transmitter after giving full throttle
2. then connecting the battery to the esc
3. after successful beep sound 
4. lowering the throttle to set the low value
Did you get a beep indicating registration of low throttle?

5. and after the calibration it works fine at that moment but after disconnecting the battery motor is not working. Recalibration is required.
What happens the next time you power the Rx?
No response to throttle?
What is the indication that it needs recalibration?
Is the throttle at low when connecting power to Rx?

Do you have another Esc to try with and see if the problem persists?


• Did you get a beep indicating registration of low throttle?
-Yes the beep is indicating the registration of low throttle value.

• What happens the next time you power the Rx?
- After disconnecting the battery and when reconnecting without the calibration mode ,no beep sound occurs which used to occur while powering up .

•No response to throttle?
What is the indication that it needs recalibration?
- No response to throttle .
No response to throttle is the indication itself.

•Is the throttle at low when connecting power to Rx?
- Didnt get your question.

•Do you have another Esc to try with and see if the problem persists?
- No i dont have , esc is working perfectly after calibration but after disconnecting the battery the problem pursued.

Sent from my SM-G925I using Tapatalk
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
How to set the fail safe on Hobbbyking car TX/RX
Radios and Receivers
theleabres 0 2521 Last post February 22, 2015, 08:23:59 PM
by theleabres
ESC calibration
Servos, Gyros and All Electronics
Vysh975 0 1867 Last post July 15, 2016, 11:54:39 PM
by Vysh975
Kk 2.1.5 yaw esc calibration problem
Multirotors
Rcjabalpur 1 3154 Last post December 06, 2019, 08:23:54 PM
by Yedhu
ESC Calibration Problem
Beginners Zone
krishna_gopal_2 16 6609 Last post July 03, 2018, 05:37:30 PM
by girishsarwal
Does Pixhawk support motor Fail-safe?
Beginners Zone
MrNams 0 1030 Last post June 21, 2020, 09:14:23 AM
by MrNams