|
Title: complication in radio function facility with Esc Post by: JKKASTA on May 09, 2010, 08:59:59 PM Hello Friend
I have KDS 7 ch 2.4 ghz radio, this radio has the facilty that when we start the radio and if throttel stick is not on full down position then the radio will not send signal to the rx and will keep beeping it is a good facility but when I want to setup full throttel range for Esc then this facility prevent me to do so, so what should i do Title: Re: complication in radio function facility with Esc Post by: anwar on May 10, 2010, 08:47:25 AM How about you start the radio at full low throttle so it starts transmitting (the receiver/ESC power is off), then take the throttle stick to the max position, turn on the receiver/ESC power so the ESC can register max throttle, bring down the throttle to minimum so that the ESC can learn the minimum also ?
Be sure to secure the aircraft and stay away from the props/blades when you try this the first time ! ;) Title: Re: complication in radio function facility with Esc Post by: JKKASTA on May 11, 2010, 12:24:10 AM Thanks Anver Sir
I resolved my problem with your help, it was so simple but bcoz I am newcommer in this field and in future I hope for your help thanks again |