RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: January 16, 2019, 03:10:37 PM »
kvedula_1995
Plane Lover
Active Member

**

Reputation Power: 1 
kvedula_1995 has no influence.
Offline Offline

City: Bhubaneswar
State: Orissa
RC Skills: Beginner
Posts: 16
Join Date: Dec, 2018




Hey forum,

As mentioned in the subject, I tried to bind the ESC with the motor, and according to few online videos, it should make a double beep and the fan would make a jerk motion, when transmitter throttle is calibrated, but what I am hearing is a single beep, the most probable guess would be that I have fried the ESC while in the process of soldering, since the Electrical Hobby guy recommended me 50W soldering iron.

To be precise.

https://www.amazon.in/Soldron-SI50A-50W-Soldering-Iron/dp/B017RGQ8RS?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=_k_CjwKCAiAyfvhBRBsEiwAe2t_i0jpWM6mAUwTMR9odGW82IOWabKlZv2QndNV6BcipQs_TyF24KXWBhoCc0sQAvD_BwE_k_&gclid=CjwKCAiAyfvhBRBsEiwAe2t_i0jpWM6mAUwTMR9odGW82IOWabKlZv2QndNV6BcipQs_TyF24KXWBhoCc0sQAvD_BwE

and the operating tip voltage is around 450 deg C, and once I soldered I felt the warmth in the copper wire midway to the ESC and whenever I try to touch the wire which is either connected to ESC or Motor, let's just say the whole setup wire when moved, not sure which wire, the ESC makes a sound, its not a mandatory event, but most of the time it happens.

I have Fs i6, and my ESC firmware is SimonK.

Regards
Vedula
Logged
 

Read
« Reply #1 on: January 16, 2019, 03:28:04 PM »
shirsa2001
Plane Lover
Forum Veteran

****

Reputation Power: 3 
shirsa2001 has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 260
Join Date: Sep, 2017



If you have accidentally fried your esc it would not beep even once. The initial beep sometimes denotes the number of cells. Guess you accidentally entered into programming mode and programmed the esc to a different battery type. You are using 3S I guess. Try going through the manual of the esc and reprogram. Just wild guess.
Logged
 

Read
« Reply #2 on: January 16, 2019, 03:45:43 PM »
kvedula_1995
Plane Lover
Active Member

**

Reputation Power: 1 
kvedula_1995 has no influence.
Offline Offline

City: Bhubaneswar
State: Orissa
RC Skills: Beginner
Posts: 16
Join Date: Dec, 2018



Sorry, I didn't get you sir, but I don't even have a programming card, can the ESC be programmed via Transmitter? Newbie here.
Logged
 

Read
« Reply #3 on: January 16, 2019, 06:07:45 PM »
shirsa2001
Plane Lover
Forum Veteran

****

Reputation Power: 3 
shirsa2001 has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 260
Join Date: Sep, 2017



Ya. most esc s are programmable using transmitter. Do you have the product manual with you? it generally contains all the instructions.
Logged
 

Read
« Reply #4 on: January 19, 2019, 10:49:36 PM »
kvedula_1995
Plane Lover
Active Member

**

Reputation Power: 1 
kvedula_1995 has no influence.
Offline Offline

City: Bhubaneswar
State: Orissa
RC Skills: Beginner
Posts: 16
Join Date: Dec, 2018



Didn't knew this, I thought ESC's didn't need any programming, hopefully I went to hobbystore and got a new set of compatible ESC and ready to sky motor, I hope I will soon test the old motor or ESC, because the Hobbyshop guy warned to not put faulty esc with motor and vice versa, but I don't know how much truth is in his statement.
Logged
 

Pages: [1]   Go Up
Jump to: