Hello,

I have build a quad using DJI NAZA M Lite FC. Though i have calibrated the ESCs individually with TX by connecting them directly to the RX throttle channel and calibrated the sticks, motor idle speed(set it to High after referring to some videos in Youtube) through DJI NAZA M Lite Assistant software, when connected the ESC+Motor with FC and armed; the motors are not starting in sync.

By any chance did someone here faced this issue and if yes, kindly drop a comment how did you manage to overcome this.

Thanks in advance.

Keep the motor idel to low, and re calibrate the esc together

Sent from my ONEPLUS A6000 using Tapatalk