hi, I am a student from Andhra Pradesh, India. I recently made a drone using kk2.1.5 controller. And now i wanna make a new rc plane ( F-22 ), i am using FSCT6B a six channel transmitter, now to make this f22 i have to make the ailerons and elevator using only two servo motors, that is like both elevator and ailerons should work by two servos only. Now for two servos performing this function they should be mixed, and i have done all the correct procedure, but my servos arent getting mixed, i dont know why but they are not functioning properly, so i decided to make ailerons with two servos and elevator with another different servo, now i just want to know that can i apply this setup to this rc F-22 (it is a delta wing model) ?. please someone just help me or contact me, thankyou.

instagram : vigneshhhh_h

whatsapp : 9154174740

for a better understanding my problem, I've attached a file, please check it out

@falcon_xs

Do you have the CT6B manual for instructions about setting up delta/elevon mix on channels 1&2?

If not, I can email it to you.

Regards
Iyer

heyy, thank you so much  @k k iyer  for replying i actually saw some utube videos where i tried mixing the channels, but i failed, and yes thankyou soo much for this, if u also have the reset instruction like the reset program for ct6b, please can u mail that also, i will try resetting my radio control. thankyou.

my mail id : saivigneshathipalli@gmail.com

Sent!

One of my colleagues built this model. He used only the horizontal stabilizers for maneuvering the model (no servos or servo linkage for ailerons). He did elevon mixing on ch1 (aileron) and ch2(elevator) both with 50% throws initially. Don't know the size of your model hence I can't comment on the need of ailerons.

If you want to setup your model as in the first picture, you need a y-cable for connecting both the aileron servos to channel 1 and as only one servo is controlling the elevators, you just need to plug that servo to channel 2 , I guess its straight away, no need of mixing.