RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: June 25, 2018, 07:18:01 PM »
krishna_gopal_2
Plane Lover
Active Member
**

Reputation Power: 1 
krishna_gopal_2 has no influence.
Offline Offline

City: Madurai
State: Tamil Nadu
RC Skills: Beginner
Posts: 5
Join Date: May, 2018




Dear All,

I am a newbie. I am building a 450mm Quadcopter. I am using

-> 2200VA Brushless motors

-> 30A ESCs

-> KK2.1.5 Board

-> 3.4V LithiumIon Batteries - 3 connected in Series

-> Flysky Tx (CT6B) & Rx

Acc Calibration - Done
Self Level - On
Type - Agro
Receiver Test - Pass
ESC Calibration - Seems to Pass for a While

After Arming, and increasing throttle 2 or 3 motors turn ON. Others Turn ON later. At Full Throttle, almost all motors STOP and try to rotate on both the Directions.

Please help me to fix the issue. Huh? Huh? Huh?

Thanks in Advance.  Bow
Logged
 

Read
« Reply #1 on: June 25, 2018, 07:43:16 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 51 
K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 4318
Join Date: Jan, 2012



@krishna_gopal_2

Welcome to RCI.

Motors try to rotate in both directions Huh?

If you mean that they judder, the most likely cause is poor/cold solder joints between ESC and motor, manifested at high current, ie, full throttle.

Resolder all bullet connectors and see if it solves the problem.

If you have difficulty in soldering connectors, let me know. I’ll share my method.
Regards
Logged
 

Read
« Reply #2 on: June 25, 2018, 07:52:30 PM »
krishna_gopal_2
Plane Lover
Active Member
**

Reputation Power: 1 
krishna_gopal_2 has no influence.
Offline Offline

City: Madurai
State: Tamil Nadu
RC Skills: Beginner
Posts: 5
Join Date: May, 2018



Here is the video

Logged
 

Read
« Reply #3 on: June 25, 2018, 07:56:46 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 51 
K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 4318
Join Date: Jan, 2012



Yes, this is judder.
Pl try the suggestion in my last post.
Chances are that it will solve the problem.

After that we can tackle throttle calibration etc!
Logged
 

Read
« Reply #4 on: June 25, 2018, 08:36:14 PM »
Balakrishna Reddy
Plane Lover
Forum Hero
*****

Reputation Power: 8 
Balakrishna Reddy has no influence.
Offline Offline

City: Hyderabad
State: Telangana
RC Skills: Intermediate
Posts: 679
Join Date: Feb, 2015



Hey buddy you are not supposed to give full throttle indoor with props mounted. It could have been lethal.
Play safe.
--> Use lipo batteries if possible li-ions may not provide required power to motors.
--> As Iyer sir said recheck the solder joints. One of my friend had the similar problem and the reason was poor solder joints. Check the connection between motor and ESC carefully. After resoldering check the motors individually connecting them to ESC. Do not mount props. Use some tape or paper to see the direction.

Try to get better radio as ct6b has some issues with pitch or elevator centering. It is good for plane though.
Logged
 

Read
« Reply #5 on: June 25, 2018, 10:37:28 PM »
taksh
Plane Lover
Forum Hero
*****

Reputation Power: 8 
taksh has no influence.
Offline Offline

City: GHAZIABAD
State: Uttar Pradesh
RC Skills: Beginner
Posts: 522
Join Date: Nov, 2017



My esc becomes hot when i start my quad. and motor is also not running.
Please help.
Logged
 

Read
« Reply #6 on: June 25, 2018, 11:21:25 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 51 
K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 4318
Join Date: Jan, 2012



My esc becomes hot when i start my quad. and motor is also not running.
Please help.
@taksh
Please avoid inserting your problems in someone else’s thread.
Logged
 

Read
« Reply #7 on: June 25, 2018, 11:23:08 PM »
taksh
Plane Lover
Forum Hero
*****

Reputation Power: 8 
taksh has no influence.
Offline Offline

City: GHAZIABAD
State: Uttar Pradesh
RC Skills: Beginner
Posts: 522
Join Date: Nov, 2017



@K K Iyer
Okay but my problem is not solved.
Logged
 

Read
« Reply #8 on: June 25, 2018, 11:27:21 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 51 
K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 4318
Join Date: Jan, 2012



@taksh,
You have already raised this issue in your own thread.
Wait for replies there.
Why interfere with threads of others?

Logged
 

Read
« Reply #9 on: June 25, 2018, 11:29:38 PM »
taksh
Plane Lover
Forum Hero
*****

Reputation Power: 8 
taksh has no influence.
Offline Offline

City: GHAZIABAD
State: Uttar Pradesh
RC Skills: Beginner
Posts: 522
Join Date: Nov, 2017



@K K Iyer
I already said "Okay" which means i understood. So delete & edit these comments.
It is better to contact me via pm if any problem.

Logged
 

Read
« Reply #10 on: June 25, 2018, 11:34:53 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 51 
K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 4318
Join Date: Jan, 2012



@taksh
Yes, there is a problem.
See PM already sent.
Logged
 

Read
« Reply #11 on: June 26, 2018, 11:15:08 AM »
krishna_gopal_2
Plane Lover
Active Member
**

Reputation Power: 1 
krishna_gopal_2 has no influence.
Offline Offline

City: Madurai
State: Tamil Nadu
RC Skills: Beginner
Posts: 5
Join Date: May, 2018



Thank you all for your valuable comments. Will start resoldering and checking the connections.
@k k iyer - Could you PM your soldering method to me. A Photo or a video will be very useful.
Logged
 

Read
« Reply #12 on: June 30, 2018, 04:09:49 PM »
krishna_gopal_2
Plane Lover
Active Member
**

Reputation Power: 1 
krishna_gopal_2 has no influence.
Offline Offline

City: Madurai
State: Tamil Nadu
RC Skills: Beginner
Posts: 5
Join Date: May, 2018



Hi Everyone,
-> I changed the battery to LiPo 2200mah
-> Resoldered all the connections with new set of wires. Better than the previous ones
-> Acc Calibration passed through
-> Layout Set to x - Quadcopter
-> No Errors seen in front LCD panel
-> Receiver Test passed through
-> ECS Calibration passed through (it seems)

But Not Arming  Head Scratching
Please help me sort it out.
Logged
 

Read
« Reply #13 on: June 30, 2018, 06:58:24 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 51 
K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 4318
Join Date: Jan, 2012



Replied via PM
Logged
 

Read
« Reply #14 on: July 02, 2018, 06:59:11 PM »
girishsarwal
Plane Lover
Forum Hero

*****

Reputation Power: 17 
girishsarwal has no influence.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Beginner
Posts: 1408
Join Date: May, 2012

DIYer



I guess you only need to calibrate your ESC's (all of them connected to the battery when you calibrate). I am assuming you are well versed with the calibration procedure. and take the props off please.

"ESC calibarion passed through (it seems)"

why the "it seems"?
Logged

gs
 

Read
« Reply #15 on: July 02, 2018, 08:21:37 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 51 
K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.K K Iyer is on the verge of being accepted.
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 4318
Join Date: Jan, 2012



@ Girishsarwal,
He solved it yesterday.
Apparently what I PMed him was just what he needed.
Though my experience of quads is close to zero  Grin

Actually not a complete ‘tukka’, as I learnt many things by research and trial and error while setting up my first and only quad a few years ago.
Despite never having flown it more than 10ft high or 50ft away.
As a one time glider jockey, I have a mortal fear of anything that can’t come down to earth gently if power is lost...
Regards
Logged
 

Read
« Reply #16 on: July 03, 2018, 05:37:30 PM »
girishsarwal
Plane Lover
Forum Hero

*****

Reputation Power: 17 
girishsarwal has no influence.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Beginner
Posts: 1408
Join Date: May, 2012

DIYer



 Thumbs Up

I have a mortal fear of bringing down airborne stuff to pieces, regardless of power failure or gliding capabilities...lol
Logged

gs
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Problem with throttle range calibration.
Multirotors
Arsenal14life 7 2754 Last post August 06, 2013, 12:15:07 AM
by PankajC
Problem regarding radio calibration of 8 ch flysky Tx,Rx with apm 2.6 « 1 2 3 4  All »
Multirotors
mousum 75 17450 Last post August 06, 2015, 12:24:31 AM
by santanucus
F450 Quadcopter kk5.5 Calibration problem.
Multirotors
smithraj 2 1750 Last post February 15, 2016, 07:08:34 PM
by Sukhpreet
ESC calibration
Servos, Gyros and All Electronics
Vysh975 0 1091 Last post July 15, 2016, 11:54:39 PM
by Vysh975
Kk 2.1.5 yaw esc calibration problem
Multirotors
Rcjabalpur 1 1330 Last post December 06, 2019, 08:23:54 PM
by Yedhu