Hi All,
I am facing flipping issue while taking off the quadcopter. I have calibrated the ESCs, Set the layout as Quadcopter X. Also tried various PI settings but still I am facing the same issue. Can anyone let me know how to solve it? Below are quad specs
Frame = F450
Motor = A2212 1400KV
Props Used = 8x4.5 , 10x4.5(Face same issue in both sizes)
Esc Rating = 30A
Please refer below link for the video.
https://drive.google.com/file/d/18U53p5Lt-kgvyOd_bNsuWkZ1PH54APcQ/view?usp=drivesdkAs far as I can make out, the direction of rotation of the motors, as well as the fitment of CW/CCW props seems to be correct.
So try this simple solution first:
1. Put 3-4 clicks of LEFT RUDDER trim
2. Put 5-6 clicks of RIGHT AILERON trim.
It may or may not solve the problem.
But if there is any improvement, it will at least help you in figuring out why it flips.
Best of luck.