Title: Ft Flyer setup | Beginner Post by: adixit on August 02, 2019, 11:11:59 AM Hi All,
I am a beginner to this hobby (0 flying experience), and thinking of building the FT flyer. Will a 935 kv motor, 10x4.5 prop and 850 mah 3s be ok for that ? (I guess this is FT power pack B). Also planning to use 5 mm unlaminated depron, will tape the depron where cavities, bevels and score cuts have to me made. Any help will be appreciated. Thanks in advance ! Title: Re: Ft Flyer setup | Beginner Post by: prabal276 on August 03, 2019, 10:06:28 PM Which is this Motor? Could you maybe give a link to it?
Kv alone isn't sufficient to determine it's suitability. I used 5mm depron so that will be fine. The battery is fine too. (Maybe get a 1000 mah, it will be a little future-proof) Regards, Prabal Title: Re: Ft Flyer setup | Beginner Post by: adixit on August 03, 2019, 10:14:24 PM EMAX MT2213 935KV Brushless DC Motor - Red Cap (CCW Motor Rotation) With Prop1045 Combo (Original)*
https://robu.in/product/emax-mt2213-935kv-bldc-motor-ccw-prop1045-combo-original/?pid=29090 |