RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: September 10, 2015, 04:59:46 PM »
tintin
Plane Lover
Active Member

**

Reputation Power: 2 
tintin has no influence.
Offline Offline

City: bhilai
State: Chattishgarh
RC Skills: Beginner
Posts: 61
Join Date: Aug, 2015

learning to fly




FRIENDS,

disappointed with my kk 5.5 blackboard ....i got hold of a avionic hexa quad fc ...........it immediately linked with the flysky 6 ch and looked fine..........................when i tried to fly the thing ..................it wont lift off..................the rotors ran perfectly and even on max throttle the quad didnt lift off .................instead it flipped on the grass....................

got back the quad on the table and took my new hobbywing ESC programmer and connected all the esc one by one .......

brake -off
battery type - li
cut off - soft
cut off voltage -low
start mode - normal
timing- middle
music -nothing
reserved item  - option 1

when i did this for all the 4 i realised that the ESC had diff settings earlier ................just a lill bit here and there...................

now where am i wrong ....................the thing wont lift off the esc are 30 amp mystery, motors are 1000kv, props 10x4.5 frame is 450....lipo is 1100 mah..............what to do ...............tx and rx is flysky 6 ch

weight

prop with metal knob/holder - 12.5 g
flysky rx - 7 g
avionic fc with leads - 16.5 g
lipo - 182 g
brushless motor - 50 g
each leg of the quad - 52 g
esc - 26 g
plus the pcb with soldering and around 10 plastic ties

anyone who can help me lift off...............................
Logged

open to help and be helped .....................
 

Read
« Reply #1 on: September 10, 2015, 05:08:27 PM »
manasdeore
Plane Lover
Active Member
**

Reputation Power: 1 
manasdeore has no influence.
Offline Offline

City: Airoli
State: Maharashtra
RC Skills: Intermediate
Posts: 34
Join Date: Feb, 2012



It seems to be the problem with your battery. Please let me know the exact ratings of your battery and additionally also provide model numbers of your esc and motors.

Did you calibrate your escs before connecting them to the fc?
Logged

Custom Spray painted Flysky TH-9x, RCB6i, FS-T6.
3 x FT Spitfire, FT Storch, nnChipmunk, Hydroplane.
F450 with custom made Multiwii and currently flying on KK2.1.5, Vtail quad with Naze32, Mini Tricopter with Flip32+, Pentacoptor with custom made Multiwii.

Flying is falling with style Cheesy
 

Read
« Reply #2 on: September 10, 2015, 05:17:29 PM »
tintin
Plane Lover
Active Member

**

Reputation Power: 2 
tintin has no influence.
Offline Offline

City: bhilai
State: Chattishgarh
RC Skills: Beginner
Posts: 61
Join Date: Aug, 2015

learning to fly



the battery is unbranded grey coloured 1600 ( just asked the seller)
esc is -mystery CLOUD-30A , BEC -2A/5V VER 2.1 DC5.6V-16.8V 30A
no after i programmed the esc i dint try flying
Logged

open to help and be helped .....................
 

Read
« Reply #3 on: September 10, 2015, 05:51:16 PM »
tintin
Plane Lover
Active Member

**

Reputation Power: 2 
tintin has no influence.
Offline Offline

City: bhilai
State: Chattishgarh
RC Skills: Beginner
Posts: 61
Join Date: Aug, 2015

learning to fly



just weighed my quad with all and sundry the total weight is 850 gms.................any help
Logged

open to help and be helped .....................
 

Read
« Reply #4 on: September 10, 2015, 07:01:03 PM »
santanucus
Plane Lover
Forum Veteran
****

Reputation Power: 5 
santanucus has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Beginner
Posts: 396
Join Date: May, 2015



Is the Lipo at least a 3S one and 20C or more? 1100 mAH won't make your flight long with 850 gms but it should at least lift off if the supplied current is sufficient.

But if it flips then it could be a different issue like wrongly placed props or the ESCs are connected to the wrong connectors etc.
Logged
 

Read
« Reply #5 on: September 11, 2015, 08:48:15 AM »
aryapotdar
Plane Lover
Senior Member
***

Reputation Power: 3 
aryapotdar has no influence.
Offline Offline

City: kolhapur
State: Maharashtra
RC Skills: Intermediate
Posts: 131
Join Date: Feb, 2015



Try increasing gains........
Logged
 

Read
« Reply #6 on: September 11, 2015, 01:22:25 PM »
sooraj.palakkad
with eyes in sky
Heli Lover
Forum Hero

*****

Reputation Power: 21 
sooraj.palakkad barely matters.sooraj.palakkad barely matters.
Offline Offline

City: Palakkad
State: Kerala
RC Skills: Expert
Posts: 2058
Join Date: Aug, 2014

SPN


Re:

First doubt is the battery for sure.

But still , as you say there is tendency for flipping , check you have correctly installed props according to motor lay out.
Also check motor rotations and ESC to flight controller connections.
Logged

RC Hobbyist and an Aerial Cinematographer..
 

Read
« Reply #7 on: September 11, 2015, 06:24:44 PM »
tintin
Plane Lover
Active Member

**

Reputation Power: 2 
tintin has no influence.
Offline Offline

City: bhilai
State: Chattishgarh
RC Skills: Beginner
Posts: 61
Join Date: Aug, 2015

learning to fly



friends,

i have put the motors to 1 and 3 clockwise and 2 and 4 anticlockwise..............all propellers push air downwards.............10x4.5 written side is on top of all 4 props........................any change i need in this setup.

the battery ordered is this one

http://rcmumbai.com/index.php/product/gens-ace-2200mah-11-1v-30c/
Logged

open to help and be helped .....................
 

Read
« Reply #8 on: September 11, 2015, 06:39:24 PM »
rajsachdev
Heli Lover
Senior Member

***

Reputation Power: 2 
rajsachdev has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 102
Join Date: May, 2014



No lift and flipping is generally due to wrong props orientation or wrong order of motors connected on outputs, please remember every FC has a different motor numbering scheme make sure you are following  motor numbering scheme of your new FC not the old one.
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
My new quad
Self-designed, DIY and College Projects
rasheed 12 8998 Last post July 04, 2011, 10:35:32 AM
by manu
Help with my quad. « 1 2  All »
Multirotors
satyagupta 29 20073 Last post June 10, 2012, 08:41:20 PM
by Dharmik
Quad-13 (A Beginners Quad-copter)
Multirotors
karan.k 1 4069 Last post October 06, 2013, 02:08:55 AM
by aniket210696
self designed h frame quad rotor and quad cum plane
Multirotors
sbajare 7 8511 Last post July 18, 2014, 09:51:20 AM
by jj4u
quad motors ,ESCS ,reptile quad frame and turnigy 9xr for sale
For Sale
Dk 9 5747 Last post May 28, 2015, 10:00:53 PM
by Antriksh