|
Title: Lipo Charger Post by: A_Qaiser on May 14, 2017, 07:59:09 PM Hi guys,
Recently I bought a Turnigy 4.0 4000mah 30c 3s lipo from Flipkart. I have been using an EMax B3 charger (a clone probably) for earlier 2000mah batteries. My question is should I use the Same charger for this one too or is it not recommended? Also my charger blinks Green and red when I plug it in AC without a battery connected, I hope this is all right or is it damaged? I am 😕 confused !!!!! Any advice is appreciated. Regards Title: Re: Lipo Charger Post by: Deeshank on May 14, 2017, 10:52:36 PM behind the B3 charge there is a switch .. lipo and something else i dont remember .. switch it to lipo . you should be good .
PS .. charging time will be crazy high for 4000mah . Title: Re: Lipo Charger Post by: A_Qaiser on May 15, 2017, 12:12:25 PM behind the B3 charge there is a switch .. lipo and something else i dont remember .. switch it to lipo . you should be good . PS .. charging time will be crazy high for 4000mah . behind the B3 charge there is a switch .. lipo and something else i dont remember .. switch it to lipo . you should be good . Mine is a clone I guess.....Only for lipo? The battery won't be harmed in using it ?PS .. charging time will be crazy high for 4000mah . Title: Re: Lipo Charger Post by: madaquif on May 15, 2017, 10:10:31 PM you can charge your battery with b3 with out any issues.....but it will take very long time to get it full charged.
when the battery is not connected/fully charged.....the lights on the charger will glow green.....that's quite normal. Title: Re: Lipo Charger Post by: kiran rc on May 15, 2017, 10:31:35 PM Also my charger blinks Green and red when I plug it in AC without a battery connected, I hope this is all right or is it damaged? That's normal, the latest version of B3 chargers have different IC's which gives rise to the flickering of red and green lights. However, it won't affect the performance. |