@arif if you are in mumbai
You can contact me
7678013993

Regards
Chintal
Rcmumbai.com

guys,

i am a newcomer in rc world. if anyone has some tips for rc planes then please share with me as i had made a plane but could not able to fly it. every time it falls on the ground.

regards,

Scratch building is not the best thing to do when you are just entering the hobby . You should buy a 'sky surfer' type of an aircraft and then move up , you should gain some basic knowledge about aerodynamics as it will help you alot . Although IMO without practicing on the simulator you would be wasting your time in the field , if you can get a sim like real flight 7 etc .

Every plane if not flown properly falls to the ground.... the world is just like that..... even if you know how to build a plane and fly it scratch built ones very very often fall to the ground and they do not want to fly.

Moral of the story is..... buy a proven model or a kit and make is as per the specifications.... Read some aerodynamics as to why does and aeroplane flies..... Learn how to fly on a simulator...... Look for a mentor to take you to the field for the first time and fly your model for you...... learn from him.

That's how..... it is done.

No cakewalk for a newbie.....

+1 and post here some pics of your plane.

thanks all,

i should really say that the members of this forum are very active and cooperative. i am attaching my plane's pics. kindly let me know where to buy a simulator? also simulator works on any transmitter?

Yes simulator work most of radios if it have simulator cable port. buy from hobby shop or any member..
What is airfoil of wing.

to be very frank. airfoil i don't know.

does anyone have used simulator for sale ??

You can get sim for 600 or 700 from some lhs.

To be true ,I actually managed building models (un powered )with therma cole and mopping sticks . But I need some good raw materials .i saw the various posts but . No positive results please if you can give some help in to search shops in kolkata

I want to build an actual indian rc empire """"""""of Indians ! For Indians ! By Indians and build an true size (not so big ,one man type) flying wing

motors get faster even when throttle is at fixed position in quadcopter......quattro esc kk 2.1.5....can anyone help

What do you mean by motors getting faster ? , is the quad gradually climbing at fixed throttle ? then it is fine.

But if motors go up to full throttle, with out movement in throttle stick , that is a problem.

Motors are moving at a defined speed when throttle is pushed up to some limit but when throttle is left at that position the motors tends 2 move little more faster after sometime

Do the quad hover ? or it climbs up on it's own with out throttle movement ?

Nope

Well, is the flight control board calibrated ? ,
Have you flown with this before ?

I think this belongs in a separate thread. Anyway, my advice for problems with the kk 2.1 is:
1. Check your firmware version. The latest is 1.19S1. If it is out of date update ASAP.
2. Run a factory reset and calibrate your ESC, run the ACC calibration
3. Do a receiver test. Check that the max values when you move the sticks are between -90/-100 to 90/100. For the throttle it should be between 0 and 100. Adjust your trims if needed
4. Check things like your stick scaling, transmitter expo/ endpoints.

We also need complete details of the setup- Tx, motors, ESC, frame.

I would like to construct a rc plane .will u help me ,I hv not mechanism details
pls sent me through email
email :sajeeshsethumadhavantp@gmail.com

@ SAJEESH, Mail send. Where are you in Palakkad ?

Im in need of flight control board

Are you making planes or Multirotors ?

Sajeesh - Welcome to RC India. 

Please take a moment to read these rules, and post in the appropriate boards/threads.  For example, if you "want" some piece of equipment, please post in the "Wanted" board.

http://www.rcindia.org/rc-india-forum/forum-usage-tips/

and regarding the 'Moving faster' issue.
Tweak the PI Settings.