|
Title: Motor Compatibility with Tarot 680 Pro Frame Post by: manjulal on October 05, 2018, 06:26:43 PM Hello Everyone,
I was planning to upgrade my existing Quadcopter to a Hexacopter. I have shortlisted the Tarot 680 Pro frame for this. I want to see the possibility of using the existing Sunnysky V4006 740KV motors I have with my quad to this new frame. If I can do that then I can save some money and go for just two more motors of the same type! :) I want to know if these motors are compatible with the Tarot 680 Pro frame or not? I plan to use 13 Inch CF props on a 4S LiPo setup. Title: Re: Motor Compatibility with Tarot 680 Pro Frame Post by: ambattuhari on October 06, 2018, 09:16:04 AM Copied:-
Configuration Specification: The diameter of 695MM Rotor size: 12-13 inch carbon fiber propeller TL2829 Brushless motor: 4S/620KV4006 brushless motor TL68P02 Battery specifications: 14.8V 4000-5000MHA Brushless ESC: 20-30A Suggested Setup: 6x 2212 KV980 motor //www.fpvmodel.com/t-motor-mt2212-kv750-kv980_g306.html //www.fpvmodel.com/sunnysky-x2212-brushless-motor-kv980_g345.html 3 pairs 10 inch CF propellers(carbon fiber 1038 or 1047) 6x 18-30A ESC Title: Re: Re: Motor Compatibility with Tarot 680 Pro Frame Post by: manjulal on October 06, 2018, 11:33:47 AM Copied:- Thanks for the suggested setup...but I still did not get an answer to my question! Configuration Specification: The diameter of 695MM Rotor size: 12-13 inch carbon fiber propeller TL2829 Brushless motor: 4S/620KV4006 brushless motor TL68P02 Battery specifications: 14.8V 4000-5000MHA Brushless ESC: 20-30A Suggested Setup: 6x 2212 KV980 motor //www.fpvmodel.com/t-motor-mt2212-kv750-kv980_g306.html //www.fpvmodel.com/sunnysky-x2212-brushless-motor-kv980_g345.html 3 pairs 10 inch CF propellers(carbon fiber 1038 or 1047) 6x 18-30A ESC Can anyone comment? Sent from my Mi A2 using Tapatalk |