RC India

General Topics => Beginners Zone => Topic started by: satishjohnbosco on May 20, 2013, 11:53:24 AM



Title: My First foam Plane Build DeltaStorm 1 from RC Group Plan -- Under Construction
Post by: satishjohnbosco on May 20, 2013, 11:53:24 AM
Hi All,

Just thought I shared my build i.e (DeltaStorm 1 from RC Group Plans http://www.rcgroups.com/forums/showthread.php?t=779331 ) which is still to mature completely. However, I was able to get the plan and scrape it out on a Cardboard and then cut it out on a thermofoam and get it in shape. Was such a joy to get one built for the first time.

Also for the transmitter for this version i stripped out one of my car toy which is say 27mhz for receiver board and transmitter  and motor from my old heli and working on getting these things to bond.

Interestingly this was easy to build compared to lot many plans I tried. It also just floats so well when launched from hand (to check the level and CG - using CGCalc application from android app). Waiting to fly very soon.


Title: Re: My First foam Plane Build DeltaStorm 1 from RC Group Plan -- Under Construction
Post by: satishjohnbosco on May 20, 2013, 12:05:22 PM
Adding some more pics.. clarity is not good due to resize.. will post more of how i started. Also attaching the plan that i used. Any suggestions or feedback are most welcome.


Title: Re: My First foam Plane Build DeltaStorm 1 from RC Group Plan -- Under Construction
Post by: satishjohnbosco on May 20, 2013, 12:06:00 PM
Plan attached


Title: Re: My First foam Plane Build DeltaStorm 1 from RC Group Plan -- Under Construction
Post by: Ahamed on May 20, 2013, 01:19:46 PM
Nice