Go for coro made plane first. Dont invest much for plane body. Invest in electronics.
Read free plans at
http://www.spadtothebone.net/But first read all posts http://www.rcindia.org/rc-india-forum/the-rc-india-gems/You may make Mr. Moss like glider first. Let me give some time, I will definitely figure out price and matched spares for model aircraft.
Tx-Rx - Avionic 6i Tx-Rx with Display and mix function. @
Rs. 2998/-Prop - Electric Fly Prop 7 x 4 E - 2 Nos @82/- =>
Rs. 164/-Motor - Avionic M1826/31 KV1800 MICRO brushless motor from RCBazaaar Rs.
560/- or
Prop Adapter if any - Not required as build with Motor. => @
FREE or
ESC - Avionic Simonk 20A ESC @
Rs.630/- from RCBazaar or
ESC Connectors - U Can direct Solder with ESC Terminals and if rotation need to reverse, just interchange any two terminal joint among 3 connectors of Motor with ESC. Heat Sink sleeve 2 mm @
Rs.10/-Soldering Iron with solder if required - Iron->100/-, Flux->10/-, Solder 50g ->60/- =>
Rs. 170/-Battery - Wolfpack 1000mAh, 25C, 7.4 volt =>
Rs. 550/-Charger - Wolfpack B3AC 2s/3s compact charger with AC plug and operating manual =>
Rs.615/-Coro - 3mm thick 6' X 8' =>
Rs. 250/- or you can use Ad bill boards fixed on light post @
free.
Screw - a gross box of 1/8" dia 13mm cup headed @20/Gross, Washer @5/Gross, Nut @16/Gross, Total =>
RS.41/-Wooden pieces - @
free as required from throw away pieces. Just cut them
Bamboo Stifners - if required - @
FREEWheel - if required - Make from Coro and Sim Card pieces. with GI Wire.
Horn for control Serface - Make from Sim Card side throwaway card pieces @
FreeGlue - 20 gm CA Glue (Fevi kwik) -@
Rs.50/-Sand Paper - 80 Grit, @
6/-Shipping Charges -
250/-Servo - 9 gm servo 4 Nos @ Rs. 205/- from RCBazaar =>
Rs.820/-Connectors - JST Male connectors for ESC Side @ @
Rs.30/- Total - 7164/- Note : Shipping Charges may vary and some other misc items will be required...