RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: March 09, 2017, 10:20:38 AM »
bulsquare
Plane Lover
Active Member
**

Reputation Power: 1 
bulsquare has no influence.
Offline Offline

City: Kapurthala
State: Punjab
RC Skills: Beginner
Posts: 3
Join Date: Feb, 2017




Hi Guys

I am new to RC Hobby, I just bought Avionics RCB6i and RC Flight Simulator Phoenix 5.
Connecting was simple. installing was also done but calibrating the rcb6i with simulator could not be done.
Can anyone help me out with some knowledge on how to calibrate the sticks and switches?

Regards and Thankyou to everyone who helps me out  Smiley Salute
Logged
 

Read
« Reply #1 on: March 09, 2017, 11:34:18 AM »
anush3d
Plane Lover
Active Member
**

Reputation Power: 1 
anush3d has no influence.
Offline Offline

City: mumbai
State: Maharashtra
RC Skills: Advanced
Posts: 5
Join Date: Mar, 2017



what is the issue that you are facing while calibrating?
Logged
 

Read
« Reply #2 on: March 09, 2017, 11:56:55 AM »
tushar50
Plane Lover
Senior Member
***

Reputation Power: 3 
tushar50 has no influence.
Offline Offline

City: Ghaziabad
State: Uttar Pradesh
RC Skills: Intermediate
Posts: 201
Join Date: Jan, 2017



1) set your rcb6i to ppm out. Connect the ppm cable to the computer. And open phoenix rc.
2)on the top left corner, click system> setup new transmitter.
3)A screen pops up, click next, it will show some steps,
Click next, another screen with info..
Click next set all switches to off position. Click next.
4) centre up both your control sticks and click next.
Move both stick to thir extreme positions both up down and left right. Click next
Then move all the switches to their extreme positions. Click next.
5) in this window you can whether your controls are working. Yellow bar should move when you give control.click next.
6) it will ask you to create a profile for your transmitter.
Click next.
7) select "other" from list of transmitters. Click next. Click next. Type the profile name.
Choose quick or advanced. Click next.
Cool Map all your channels according to their control.
Ex- on throttle channel, click "unmapped". A list opens.
Move your throttle stick, now you will see a bar moving in a channel, select that channel for throttle.
Do this for all controls.
If you want to reverse a channel, click on invert on that channel. CLICK "FINISHED".
9) IT will say you have successfully setup your transmitter
Click finish.
And you will be ready to fly.

Hope this helps.

Logged
 

Read
« Reply #3 on: March 09, 2017, 12:52:13 PM »
bijo
Heli Lover
Active Member

**

Reputation Power: 1 
bijo has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Advanced
Posts: 64
Join Date: Dec, 2013



before doing this above memtioned steps make sure that the software is licenced copy and the dongle is suitable for Phoenix
Logged
 

Read
« Reply #4 on: March 09, 2017, 11:19:06 PM »
Hellyflyer
Heli Lover
Forum Hero

*****

Reputation Power: 20 
Hellyflyer barely matters.Hellyflyer barely matters.
Offline Offline

City: New Delhi
State: Delhi
RC Skills: Advanced
Posts: 1510
Join Date: Oct, 2009

Heli=Diff parts flying together in close formation



Go over the instructions manual in the CD. There is another small file named "SALI" or something like that with a blue Icon which needs to be installed and run each time along with the Phoenix software only then your TX will be recognized in Phoenix. And make sure the slider switch on the dongle is on Phoenix.
Logged

Helis and Quads ROCK !!
 

Read
« Reply #5 on: March 10, 2017, 09:05:03 AM »
bulsquare
Plane Lover
Active Member
**

Reputation Power: 1 
bulsquare has no influence.
Offline Offline

City: Kapurthala
State: Punjab
RC Skills: Beginner
Posts: 3
Join Date: Feb, 2017



Thank you Tushar50. It was great now i have my planes flying. Thank you again for a detailed solution i really appreciated it. but one thing i am unable to fly the copters only throttle is working i cannot get the copter to take off. is there a different setting for copters. as for now i have done setup of calibration in the advance mode and allotted four channels only ch 1 - aileron, ch 2 - elevator, ch 3 - throttle, ch 4 - rudder rest is left blank. can you help me on this?
Logged
 

Read
« Reply #6 on: March 10, 2017, 09:41:12 AM »
tushar50
Plane Lover
Senior Member
***

Reputation Power: 3 
tushar50 has no influence.
Offline Offline

City: Ghaziabad
State: Uttar Pradesh
RC Skills: Intermediate
Posts: 201
Join Date: Jan, 2017



Glad that it helped you.

For setting up copters
Got to system>your controls
Then select your profile and click edit profile.
A window opens up.
Select "detailed"
Scroll down to helicopters.
On top , there will be option as "collective pitch"  it would be unmapped by you. Open the list and move your throttle stick, whichever channel you see moving select it for collective pitch.
And you will be able to fly copters.
You can also add other options like idle up, throttle hold etc. For these options you can map the switches on your transmitter.


Logged
 

Read
« Reply #7 on: March 10, 2017, 01:16:07 PM »
bulsquare
Plane Lover
Active Member
**

Reputation Power: 1 
bulsquare has no influence.
Offline Offline

City: Kapurthala
State: Punjab
RC Skills: Beginner
Posts: 3
Join Date: Feb, 2017



Thank you Tushar50. Maan you made my day. Thank you again

Regards
Akash
Logged
 

Read
« Reply #8 on: March 10, 2017, 01:20:46 PM »
tushar50
Plane Lover
Senior Member
***

Reputation Power: 3 
tushar50 has no influence.
Offline Offline

City: Ghaziabad
State: Uttar Pradesh
RC Skills: Intermediate
Posts: 201
Join Date: Jan, 2017



My pleasure.

It is a great way to learn by starting on simulators.
Happy flying and safe landing,

Tushar
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
pheonix sim for sale
For Sale
cloud9 0 2179 Last post December 21, 2010, 02:20:19 PM
by cloud9
Silverlit Space Pheonix - Not working :(
Helis
ebinmoothedam 20 11790 Last post June 21, 2012, 08:22:33 PM
by VC
Pheonix High Winger / P51 Mustang / Mini T-33 Blue Angels EDF / YAK 54 EPP micro
For Sale
dhruvafreak 19 9006 Last post May 24, 2015, 12:06:42 PM
by dhruvafreak
PHEONIX Mini Quadcopters for Sale
For Sale
Ajit Avhad 7 3948 Last post January 31, 2015, 10:41:56 PM
by sanjiv1994
esc will beep 3 times, wont spin or caliberate
Multirotors
Ribz 8 4163 Last post February 18, 2015, 03:57:59 PM
by Ribz