I bought the following -
Code Description Qty
ZC.1000.4S.35 ZIPPY Compact 1000mAh 4S 35C Lipo Pack 1
TYP1-25A-PC Turnigy TY-P1 25Amp Brushless ESC Programmin 1
TYP1-25A Turnigy TY-P1 25Amp HEXFET® Brushless Speed 2
XT60 Nylon XT60 Connectors Male/Female (5 pairs) 1
AM1001A PolyMax 3.5mm Gold Connectors 10 PAIRS (20PC 1
HKing-4S Hobby King Battery Monitor 4S 1
D2217-8-1100 Turnigy D2836/8 1100KV Brushless Outrunner M 2
HK-T6A-M1 Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 1) 1
014000010 Corona DS-319MG Digital Metal Gear Servo 4kg 1
GT-BMON6 Battery Monitor 2-6S 1
GWS-prop-DD-7035 GWS EP Propeller (DD-7035 178x89mm) (6pcs/se 1
GWS-RD-7060 GWS EP Propeller (RD-7060 178x152mm) (6pcs/s 1
FS-L001 Hobby King 2.4Ghz 6Ch Tx USB Cable 1
i got it in the post a week back
and now when i connected everything i am facing the following problems-
my motor rotates 5 degrees in one direction while making a beeping noise and then comes back to its original position
my Tx and Rx are bound but
1 i cant program the Tx
2 checking with a multimeter there is no i repeat no voltage across any channel
3 my computer does not recognise Tx
my ESC programmer card is showing very dim lights
i am attaching a video with this please help me
desperate person here
new to all this