|
Title: Problem in connecting ESC with receiver Post by: vicky on August 30, 2009, 12:15:07 PM Hello friends :) I am new to this forum and hobby as well. Thanks to subu who helped me get one RC kit. As I am novice I don’t know exact terminologies so pls bear with me. Yesterday I tried to connect the control circuit which I received from Mr Sai, but I faced a problem. When I tried to put the motor connection in receiver I could not operate the motor in CH 3 (throttle) but in other CH like 4, 5, 6 it was OK. Then I put motor connector in CH 6 and servo connector in CH 3 to check if CH 3 is faulty but I could operate it. Pls help me guys :'(
Title: Re: Problem in connecting ESC with receiver Post by: tg on August 30, 2009, 12:41:56 PM Assuming that you have a brushless motor - follow the instructions in this site - http://www.allerc.com/motorwiring.htm. Sai has also given a detailed instruction similar to this in this forum. Pls search.
Title: Re: Problem in connecting ESC with receiver Post by: tg on August 30, 2009, 12:42:40 PM ALso, TX must be switched on before connecting the battery to the ESC. Else the motor won't work.
Title: Re: Problem in connecting ESC with receiver Post by: anwar on August 30, 2009, 01:35:23 PM If you are using a Futaba transmitter (or one that follows Futaba style), you may have to reverse channel 3.
Title: Re: Problem in connecting ESC with receiver Post by: vicky on August 30, 2009, 02:03:11 PM ALso, TX must be switched on before connecting the battery to the ESC. Else the motor won't work. I think this may be the reason as I was switching on TX after making all the connections. I will check. For ur info-The motor is brushless and transmitter is Turborix Title: Re: Problem in connecting ESC with receiver Post by: Pikle6 on August 30, 2009, 02:07:41 PM no no not at all in turborix tx's you have to reverse the channel 3 button or it wont fire up
subbu Title: Re: Problem in connecting ESC with receiver Post by: Pikle6 on August 30, 2009, 02:16:24 PM why didn't you call me up i would have helped you at the same moment sorry i was busy and could not contact you
anyway here's how you need to put the mixing switches in the position its highly enlarged to ensure visibility click on it to maximize (http://i635.photobucket.com/albums/uu71/Pikle6/tx/01.jpg) any help please call me dont burn your stuff up this is how you need to connect the stuff you have (http://www.ampaviators.com/images/stories/articles/artimages/0402071.jpg) http://www.ampaviators.com/index.php?option=com_content&task=view&id=50&Itemid=27 (http://www.ampaviators.com/index.php?option=com_content&task=view&id=50&Itemid=27) subbu Title: Re: Problem in connecting ESC with receiver Post by: vicky on August 31, 2009, 10:26:21 AM Subu it worked ;D. I did as you said. Now just waiting for the plane (:|~
|