RC India

kingly suggest recharable cell 2500 mah for fly sky fs-t6 transmitter because same is consuming more batter

kp

so far this is the third thread you have opened in search of a battery for FS-T6.

well from your previous threads what I get is you are looking for only AA size cells, which can be put in T6 without any mods. but Rechargeable AA size cells (NiMH or NiCad) don't come in 1.5V, it is only 1.2V, still they can be used.

if you want more battery life with single charge, go for transmitter LiPo packs.
radiocraft on this forum has a Used Tx LiPo pack for sale. :
visit :  http://www.rcindia.org/for-sale/cheap-sale-of-batteries-esc-and-radio-control/msg202019/#msg202019 (http://www.rcindia.org/for-sale/cheap-sale-of-batteries-esc-and-radio-control/msg202019/#msg202019)

Get two sets of these http://www.flipkart.com/sony-nh-aa-b4en-rechargeable-ni-mh-battery/p/itmdyfx2mzgdxv2x?pid=ACCDYFXFFYMEC3TS&otracker=from-search&srno=t_1&query=sony+battery&ref=b3b09693-015e-46d8-9fb4-c03e32b78d76 (http://www.flipkart.com/sony-nh-aa-b4en-rechargeable-ni-mh-battery/p/itmdyfx2mzgdxv2x?pid=ACCDYFXFFYMEC3TS&otracker=from-search&srno=t_1&query=sony+battery&ref=b3b09693-015e-46d8-9fb4-c03e32b78d76)
and a good charger

For my Futaba transmitters and receivers, I get battery packs made. Earlier I used to get them from Prime Products, Syntofine Estate, Goregoan (E), Mumbai and now from Uniq Power Solutions, 240, 8th Main Road, Byrasandra Extn., I Block (E), Jayanagar, Bangalore - 560 011. The recent lot that I got from Uniq Power was priced as under. I have still to install the power connectors and start using them as I have been away from home for quite some time. My earlier packs would last for few years of use.

Ni-mh AA 9.6v 2000 mah - 980/- + 14.5% VAT
Ni-mh AA 4.8V 2000 mah - 500/- + 14.5% VAT

Ni-mh AA 9.6v 1600 mah - 850/- + 14.5% VAT
Ni-mh AA 4.8v 1600 mah - 450/- + 14.5% VAT

Do they have packs with LSD Nimh and Square packs Sir?

They make packs as per your drawings. They have cells of different sizes and capacity. Phone 080-26645806 and email info@uniqpowersolutions.in

Thanks sir

if i go lipo battery option than problem of lipo battery connection raises. there is no port for connecting lipos
kp

You just have to solder the connector to the battery bay end terminals, or you can buy a connector than can plug in to the internal connector of Tx (Either one battery either AA on LiPo connector can be connected at a time).
The first way needs soldering, the second option needs removing the back panel of Tx.

giver me link for converting in lipo mode through solder

kp

search, for Flysky t6 LiPo mod
www.youtube.com/watch?v=sLjx3KXv0zE (http://)

www.youtube.com/watch?v=DHSU6uk5R7M (http://)

Or I will post pics of my own radio .....

I used to use with lipo just solder the +,- from the battery case.