RC India

General Topics => Beginners Zone => Topic started by: Maanyat Periwal on February 08, 2022, 10:09:54 AM



Title: Reg:- my fryed flysky reciver
Post by: Maanyat Periwal on February 08, 2022, 10:09:54 AM
Hello everyone,
Yesterday was a bad day , I was flying my newly made flying wing but I forgot to add the battery strap so on the landing the battery shifted back and sorted the input +ve and -ve so my reciver fried .
I really need help ,if some one could help me with it , or sent me a reciver under 600 to 700 cause my father is not gonna buy me a new one  :help:.
I wanted fly sky FS Ia6b .
Currently I have flysky FS Ia6.
If some has the second hand FS Is6b reciver also it will work but under 500 to 600 plsss.
Thank you .


Title: Re: Reg:- my fryed flysky reciver
Post by: Maanyat Periwal on February 08, 2022, 10:08:49 PM
Pls if some one could help  :help: :help:


Title: Re: Reg:- my fryed flysky reciver
Post by: K K Iyer on February 08, 2022, 10:55:20 PM
Hello everyone,
Yesterday was a bad day , I was flying my newly made flying wing but I forgot to add the battery strap so on the landing the battery shifted back and sorted the input +ve and -ve so my reciver fried .
I really need help ,if some one could help me with it , or sent me a reciver under 600 to 700 cause my father is not gonna buy me a new one  :help:.
I wanted fly sky FS Ia6b .
Currently I have flysky FS Ia6.
If some has the second hand FS Is6b reciver also it will work but under 500 to 600 plsss.
Thank you .

Your problem is not clear for the following reasons:

1. On landing, the battery can only shift FORWARD in a sudden stop, it cannot shift back.
Unless the entire front end got crushed and pushed the battery back.

2. “ the battery shifted back and sorted the input +ve and -ve”.
Shorted which + & -?
What do you mean by INPUT +ve and -ve?

3. Which wires or parts touched to create the short?

4. If the battery got shorted, it would have exploded and burned

5. Why should the Rx get fried if the battery got shorted?

You observations and description are not adequate for identifying the problem.

Try to clarify.

Regards