Title: Want To Get Started in R/C Models Post by: vikranthrox007 on October 26, 2014, 01:39:06 PM Hello Everyone, I saw this forum today, i didn't knew that R/C is quite popular in India. I live Barabanki, near Lucknow. I want to get started in R/C. I wanna start with the Gliders. Someone please guide me
Title: Re: Want To Get Started in R/C Models Post by: kushagrad on August 01, 2017, 06:36:41 PM What help do you require. P.S. I am from lucknow too
Title: Re: Want To Get Started in R/C Models Post by: Priyanshu@ on August 01, 2017, 06:58:52 PM Dear kushagrad
Please see the date when the post is posted As this post was been posted in Oct 2014 Title: Re: Want To Get Started in R/C Models Post by: kushagrad on August 01, 2017, 07:18:22 PM My bad
Title: Re: Want To Get Started in R/C Models Post by: vikranthrox007 on August 01, 2017, 08:57:59 PM If you could tell me from where I can get the material that would help. And I am surprised that anyone replied. 😂😂. I didn't expect a reply after 3 years.
Title: Re: Want To Get Started in R/C Models Post by: vikranthrox007 on August 01, 2017, 09:05:00 PM This brings so many old memories when my exam finished and I was looking for a hobby.
Title: Re: Want To Get Started in R/C Models Post by: K K Iyer on August 01, 2017, 09:11:20 PM Welcome 007 and kusha.
Try vortex-rc.com in Allahabad. In Lucknow, contact NCC and try to locate their aeromodelling instructor Shri Ravi Gupta. His brother used to run a hobby shop near Vivekanand Hospital some years back. Visit Butchery Ground in Cantonment on a Sunday morning. If you are lucky you'll find some flyers. Regards. Title: Re: Want To Get Started in R/C Models Post by: kushagrad on August 01, 2017, 09:12:21 PM LOL. There is a hobby shop in NAKA Market Phone number: 9560773418 He sells stuff very expensive though. Before you go to the shop do ask him the prices. I would recommend you buy stuff online or get them atleast from kanpur. In kanpur it is a big cheaper. Also contact some electronics guy if you dont know exactly what you want.
I am personally from HBTU. 3rd year electronics I can help you with small stuff or problems you face while in making. We have a competition in our college every year with RC planes. You can attend that if you are interested in such stuff. Best Regards, Kushagra Dixit Title: Re: Want To Get Started in R/C Models Post by: vikranthrox007 on August 01, 2017, 09:24:51 PM Yeah thanks. I will surely attend. But I want to start with the gliders or aeromodels first. Then gradually I would move on to RC. As a matter of fact I forgot the idea of RC and stuff but now it has been revived. Thanks again.
Title: Re: Want To Get Started in R/C Models Post by: prabal276 on August 01, 2017, 10:10:19 PM What competition?
Details please Title: Re: Want To Get Started in R/C Models Post by: sagi8568 on August 01, 2017, 11:20:16 PM Getting started with RC.can someone suggest if the below electronics setup works..
BLDC1200KV01 A2212 1200Kv Outrunner Brushless Motor 30 amp ESC 1000MAH 2S 30C/60C Title: Re: Want To Get Started in R/C Models Post by: kushagrad on August 01, 2017, 11:29:25 PM Search for HBTU tech fest.
Title: Re: Want To Get Started in R/C Models Post by: vikranthrox007 on September 05, 2017, 02:32:27 PM Hi,
Thanks for all the help. For now I will be making a gilder from Advertising Board and then later will be adding a motor and battery. Since all the crafting material seems to be expensive at the moment, I will refrain from making spending on it. Now if anyone can guide me to a electronics store which sells the electronics cheap will be helpful. I just need a motor and and a rechargeable battery. And My Granny lives in Kanpur. I can also use the address of a local retailer. ;D Title: Re: Want To Get Started in R/C Models Post by: vikranthrox007 on September 05, 2017, 02:42:41 PM Hey that would be convenient. I frequent that area. I will try there.
Title: Re: Want To Get Started in R/C Models Post by: vikranthrox007 on February 25, 2019, 05:42:16 PM Ok, How do I delete this post now.
Title: Re: Want To Get Started in R/C Models Post by: AL HAM SHARI on February 25, 2019, 08:42:15 PM 🙆
|