RC India

General Topics => Beginners Zone => Topic started by: threeonethree on July 15, 2018, 01:08:48 AM



Title: Wanted nylon m3 standoffs .
Post by: threeonethree on July 15, 2018, 01:08:48 AM
I have to mount my fc over my ESC but the FC didn't come with m3 nylon standoffs. I don't want to buy a pack worth 300 to 400 for 4 nuts and wait a week for delivery. What do I do


Title: Re: Wanted nylon m3 standoffs .
Post by: threeonethree on July 16, 2018, 10:40:12 AM
up


Title: Re: Wanted nylon m3 standoffs .
Post by: miginstruments on July 16, 2018, 03:49:55 PM
Hi, I can send you some but you have to bear the shipping charges, although I ll not charge for the Spacers.


Title: Re: Wanted nylon m3 standoffs .
Post by: threeonethree on July 16, 2018, 08:36:05 PM
Still unsolved. I do not want to order a pack of 50.

i want the nylon ones like the ones that come with this esc

https://www.banggood.com/Anniversary-Special-Edition-Racerstar-REV35-35A-BLheli_S-3-6S-4-In-1-ESC-Built-in-Current-Sensor-p-1180734.html?gmcCountry=IN&currency=INR&createTmp=1&utm_source=googleshopping&utm_medium=cpc_ods&utm_content=heath&utm_campaign=pla-ods-in&gclid=EAIaIQobChMIyaWHu_Kj3AIVx4RwCh3Elgf3EAQYASABEgIwqvD_BwE&cur_warehouse=CN



Title: Re: Wanted nylon m3 standoffs .
Post by: saikat on July 16, 2018, 08:50:28 PM
Take a empty ball point refill and make some



Title: Re: Wanted nylon m3 standoffs .
Post by: threeonethree on July 16, 2018, 09:12:54 PM
i do  not know how to make it using that.

I need the standoffs.


Title: Re: Wanted nylon m3 standoffs .
Post by: K K Iyer on July 16, 2018, 09:45:36 PM
See saikat sir’s suggestion and use a blade to cut slices.
Do you really need a Chinese productfor this?
What is this? A highly technical product?
Stand offs? Eh? Is it what is known in India as washers?


Title: Re: Wanted nylon m3 standoffs .
Post by: threeonethree on July 16, 2018, 10:52:14 PM
And how does the slices screw into the other standoffs I am stacking ?

If you could point me the same product online on any Indian website that would be great


Title: Re: Wanted nylon m3 standoffs .
Post by: K K Iyer on July 17, 2018, 10:28:37 PM
Perhaps you need some space between the FCB and the base plate for the ESC.

If so, you can use 1” bolts with ~3/4” spacers cut from ball point refills, as suggested by saikat sir, and forget about your existing standoffs that are too short...


Title: Re: Wanted nylon m3 standoffs .
Post by: threeonethree on July 19, 2018, 08:16:19 AM
And then how do i stack my FC over that? I have a 4 in 1 esc.

something like this. https://f4k3url/images/NB59Bc

I need space between the baseplate and ESC AND space between ESC and FC.

And screws to make it all solid.

So you suggest long screws from base of bottom plate + Plastic spacers to seperate the ESC from Base plate. Then the existing M3 standoffs I have go into the screws to separate the ESC from the FC? How do i forget about the existing standoffs?


Title: Re: Wanted nylon m3 standoffs .
Post by: threeonethree on July 19, 2018, 11:12:09 AM
this is what i am looking for

https://f4k3url/images/vaym89


Title: Re: Wanted nylon m3 standoffs .
Post by: ambattuhari on August 01, 2018, 07:44:24 PM
http://hobbyxyz.com/index.php?route=product/category&path=66_89