RC India

RC Models => Boats => Topic started by: prashanth.shenoy on February 26, 2013, 11:37:11 AM



Title: Boat modeling : Start up tips
Post by: prashanth.shenoy on February 26, 2013, 11:37:11 AM
I have just registered for this site. My kids and I plan to assemble model boats as a hobby.
Need some guidance to start with basic models that can be assembled and can be operated.

Any suggestions where to start from. I can buy / pick up models from Mumbai / Bangalore area.  :help:




Title: Re: Boat modeling : Start up tips
Post by: VC on February 26, 2013, 11:45:31 AM
Welcome to the club!

If you look under the 'Boats' section, you will see that most of the modellers here are scratch builders, i.e., they don't work out of kits. This is primarily due to the fact that, Boat Kits are seldom seen in the market.

If you elaborate on what type of boats you plan to assemble, we can collectively guide you.

Regards.


Title: Re: Boat modeling : Start up tips
Post by: prashanth.shenoy on February 26, 2013, 12:13:40 PM
Hi VC,

I saw 2 kits on the below thread. I would like to purchase both to start with.
I guess it will be a good start for my kids and me.

http://www.rcindia.org/for-sale-completed/cheap-boat-kits/msg50695/#msg50695


Title: Re: Boat modeling : Start up tips
Post by: rcpilotacro on February 26, 2013, 01:18:49 PM
Prashanth
Welcome ! all non boat lovers joining this forum need to carry a one rupee coin on their forehead, ;) earlier all of it went to only couple of guys, now you too !!

PS
welcome! get used to the humour :banghead:


Title: Re: Boat modeling : Start up tips
Post by: VC on February 26, 2013, 06:08:28 PM
Gusty, not many have heard of Charon or the River Styx. Care to explain?

Prashanth - I've sent you a PM.


Regards.


Title: Re: Boat modeling : Start up tips
Post by: rcpilotacro on February 26, 2013, 08:45:24 PM
is it  ??? anyways Charon popularly known as The Boatman (like you ;) ) , here read this
http://en.wikipedia.org/wiki/Charon_(mythology) (http://en.wikipedia.org/wiki/Charon_(mythology))


Title: Re: Boat modeling : Start up tips
Post by: VC on February 26, 2013, 09:07:34 PM
PERFECT example of how modern technology can be misleading and frustrating. In the above post by Gusty - the entire link is in green EXCEPT the last parenthesis or "closed bracket", which is in black. Click on it and see where it takes you. :banghead:

Highlight the entire link and click it! Open it in a new tab and add a bracket at the end of the link :

http://en.wikipedia.org/wiki/Charon_(mythology)

Technology................ :banghead: :banghead: :banghead:





Title: Re: Boat modeling : Start up tips
Post by: rcpilotacro on February 26, 2013, 09:45:19 PM
sometimes it happens VC, i fixed it, all one needs to do is add url at the begining of the hyperlink and at the begining of the hyperlink and /url at the end within[]


Title: Re: Boat modeling : Start up tips
Post by: Tobin on March 06, 2013, 11:40:59 PM
 I'm in need of 4 or 5mm, brass tubes for my boat project. If anybody knows the store /shope
which sells the same kindly inform me

 thanks,
 Tobin


Title: Re: Boat modeling : Start up tips
Post by: VC on March 07, 2013, 12:13:31 AM
Try the Air Conditioning, Refrigerator repairing shops. You should find copper tubes there. For Brass tubes contact alokhovercraft (http://www.rcindia.org/profile/?u=5364).


Title: Re: Boat modeling : Start up tips
Post by: Tobin on March 07, 2013, 09:21:21 AM
Thank You VC Sir

 Tobin