Dear All,

This is my first attempt to make RC model of ONGC's osv vessel into 1:100 Scale ( I am currently working on same OSV in hull at pipavav shipyard limited)

Vessel Details:

Length: 59M (590 mm)
Width:  15M (150 mm)
Height (Mdk): 8M (80 mm)
Bow Thruster : 2 in Forward
Stern Thruster : 1 in Skeg
Propeller: 2
Rudder: 2

I ordered balsa wood for construction of Hull. But I really confused in selection of Motor,Servo,Radio,Propeller kit etc.

I request all of you to help me in selection to make my first RC build. I will post a build log as soon as I start hull.

With Best Regards,

Vishnu Gadhiya

you should first start with selecting motor, propeller,esc,battery.
High kV motors and small propeller or low kV motors with big prop should be best. Then select appropiate esc and battery.

Thank you dharmesh,

But i really don't have any idea about selection of motor or others. if you can suggest a good configuration for my ship, this will be a great help for me.

please help me rc masters (maharana, rupeshkrishna and all others)

regards,
vishnu

ok please have a look at this BOAT combo.
http://thehobbyshop.in/index.php?main_page=index&cPath=13&zenid=0a7e1beb4a4044445b1749a47d7dd5c9
you will get idea of configurations of motor, esc.