|
Title: Hovercraft build question Post by: chota_rc on October 04, 2012, 02:11:48 PM Could any one please tell me about how to attach the clevis to the control horn and to the rudder??
I have been making an Rc Hovercraft but i got strucked up at that point :( please..Any one Help me out in this Thanks Title: Re: Hovercraft build question Post by: alokhovercraft on January 21, 2015, 03:55:12 PM same here, Im too stuck at the same point! :help:
Title: Re: Hovercraft build question Post by: VC on January 21, 2015, 05:31:32 PM Alok, first off - sorry that I couldn't return your call. Today was, and still is, a hectic day. If you guys could post a picture of the actual dilemma, perhaps we could help you better.
I am assuming that you have gone through the hundreds of build photographs that are contained in the Hovercraft build threads on this forum. Title: Re: Hovercraft build question Post by: alokhovercraft on January 21, 2015, 06:40:00 PM I went through Google images, didnt get a clear idea, now a faint idea is coming into my mind..Im posting a pic of my latest build...its 16 inches long and 9 inches wide...It has a lift fan mounted at an angle to avoid torque twist problem... moreover the thruster motor's thrust is partially redirected into the skirt for additional lift. In hovercrafts, the nose should be heavy and its just the same in my case as I've directed the thrust towards the rear end...
Title: Re: Hovercraft build question Post by: alokhovercraft on January 21, 2015, 06:59:22 PM Some Closeups...
Title: Re: Hovercraft build question Post by: VC on January 21, 2015, 07:58:26 PM Am I making any sense? Call me if I am not comprehensible. :giggle:
|