This is my Scratch built rc Nitro catamaran boat.
33inc in length.
Poweres by .25 Nitro engine water cooled (BUGGY ENGINE CONVERTED TO MARINE ENGINE)
Used 3mm balsa wood and ply wood fot the build.
Customize carbon fiber exhaust made by me.

Sent from my Redmi Note 4 using Tapatalk

@ vai,
Welcome to RCI.
Fantastic first post.
Pl also post details of carbon fibre exhaust.
And videos of the boat in action.
Regards

Thanks you,
I have used mylar sheet and carbon fiber tube to give the shape of the exhaust. I used it like a mold And used c type resin. Here are some pictures.

Sent from my Redmi Note 4 using Tapatalk

Excellent job 

Thank you 🙂

Sent from my Redmi Note 4 using Tapatalk

Master class work sir . I have 4 ft long speed boat build by me but I don't know where to get motor and electronics for that could you pls tell me where to get those stuffs and the connection of motor and ESC also.
Regard
Amal

Great work Sir,

Thank you sir. for 4 ft long speed boat you can use inrunner brushless motor or outrunner brushless motor. you can get those from hobbyking and even from aliexpress. you will also get esc and water cooling jacket for those motor.you will need to get higher watts motor and mostly 6s setup. it would be better if you go with engine around 26cc.
Regard
Vaibhav Naik.

Thank you Sir

  great job done! Looks like a beast! 

Thank you sir

Sent from my Redmi Note 4 using Tapatalk

Finally she is on the water.

Sent from my Redmi Note 4 using Tapatalk

@vai,
Lovely.
Obviously you’re an expert!
Please share a build log, even though I don’t know how many boat builders are there to appreciate it.
But some airplane guys like me would be very much interested!
Regards

Thank you K K lyer,
Here are the parts which i have used for build.
3mm balsa wood ( Covering the hull)
3mm ply wood ( Main frame )
Used cyano glue and clear resin to seal the hull from inside.
4cc (.25) Nitro engine ( Buggy engine )
Fuel tank 6 oz. ( 180cc )
4.7mm flex cable ( prop drive )
5mm to 4.7mm collet.
43 mm aluminum prop.
110mm rudder assembly ( with strut )
2x 4kg torqued servo ( Throttle and Rudder)
5v 5Amp Ubec
3s 500mah 20c lipo battery ( power for electronics on board )
Automobile color with clear coat ( Fuel proof )
Over all weight (1.8kg).
CG at 33%
Prop angle is neutral.








Sent from my Redmi Note 4 using Tapatalk

Did some modification change the tune pipe length. Second this time will be using 30% nitro with 22%oil content. Even will try 42mm propeller. Will try to upload 2nd running video with following mod as i get time to visit my village again.

Sent from my Redmi Note 4 using Tapatalk