Hi Guys

 This is my first complete rc brushless motor. It is made out old scrap plywood.

Specs
Length: 20"
Motor: 1400Kv Brushless motor
ESC: 18A
Batt: 1300mah 3S
Radio: Fly Sky 4Ch
All above including Prop from rcforall.

Some Pics

Good work! How about making a cabin to complete the effect?

P.S. I LOVE the wrought iron railing grills in your home - they have such an old world charm attached to them.............

I Didn't understand what you said.

I am talking about building the superstructure / Cabin to complete the boat.

No. I m not goin to make the cabin. I will just cover it with a piece fo plywood.

Come on Guys. I am hungry for comments.

Ved,

1) It's a neat and good one. What is in the TOP ? Coro? Looks grate for APOGEE.

2) What is the driver of the speaker? Musical Chip or sound board?

3) Is the circuit tested firstly by 6 Volt Lead Acid cell as in Pic. ?

During 1th class, I have made fancy stainless like railing just by using Aluminum foil with one side paper of cigarette box, White glue (Fevicol) and ball point refill.

Just rolled the foil in pipe over refill, bend them in desired shape and pull out the refill. The structure are looks nice and charming appearance. You may use thin Foil seal (Milk Powder Tin). They need little glue (Epoxy) and looks much better.

Just said VC, The Iron casting grill in your railing looks grate (First Pic.).
And the railing structure will add visual appearance to BEAUTY.

Thanks.

Thanks All .

Looks good. Lets see how it runs.

Hey Ved, ur boat looks good man.. When do i get to see it in action?

@Ved
Nice job...!   

@ VC Sir...
Look and read in picture....
   

Yes I was referring to them. At my ancestral home in Varanasi, the same grills are everywhere - made me nostalgic.................

After my exam gets over we both and prateek will run it in the sea.

come on Guys. Comment

Nice Ved...will you post some videos..? 

Hey Rathikrishna,
 There is some problem with the ESC so i will fix the ESC and then post the video.

Ved..its nice...waiting...have a nice craft...

Thanks.

Good job  i want to ask u about the the RC system which type and servo
good luck

nice model man. Waiting for the video...

Hi Guys
After the successful flight of the micro drone(sorry.No videos) I thought of modifying my old moat to a air boat. So I used the power system bought for my new Avispad.(Going to build). Here is the video.
ENJOY!!!
 

Comment Guys

 

Thanks VC

 

Nice job...!!!
 

Hi Ved, Nice boat.  
At your age I made one boat ( kit build) around 1984 and it took me another 25 years to restart this hobby and make 2nd one. This time it was scratch build (replicate of the first one), the best what I did remembere of the first built.
http://www.rcindia.org/boats-kites-trains-and-all-others/rc-boat-hull/msg24252/#msg24252
 

Thanks a lot guys.

  Nice Build Ved..Keep Going.

Thanks Rooster

Hi Guys
 Two days ago I was testing my boat. While turning the prop hit a big stone. Nothing happeded to the prop but the motor is not working. When I connect it to the ESC and batt it doesn't make any sound and spin a bit an stop. Please help me.

Please Guys

 

you don't get answers so quick and yes i have learnt it by experience my friend!  
Just be patient and wait till tomorrow or at least wait for 2 hours
I can understand your situation ,but some one on the other side of your computer is also trying to help you, to pay back that help you just need to be patient


*I have tried refreshing a page hundreds of times hoping to find a reply but didn't work for me almost 95% of the times breaking my head for replies but only patience finds your way out
 

Can anyone help me

Please help!

I think no one is ready to help me.

Dear Ved,

I can understand your frustration, We want to help you out but we really don't have a definite answer. There could be so many things that could have gone wrong with the motor. A magnet could have come loose, the shaft could have been bent etc.

Unless someone can physically see and test the motor, it will be very difficult for him to analyse what went wrong based on : "While turning the prop hit a big stone. Nothing happeded to the prop but the motor is not working. When I connect it to the ESC and batt it doesn't make any sound and spin a bit an stop."

All the best!

I suggest you take the motor, ESC and battery and meet up with Prateek and the others from Goa and then maybe they can figure it out.

Awesome boat Vedant  

And I think the problem is with your ESC.

Hi Ved
Have you checked the motor after removing it out of the boat and separating it from the drive shaft .If you are not doing this then possibly the drive shaft is bent and hence it is not moving.

Shreekant 

yup that will be good
Ved you can come on Saturday evening and PM me your phone no. as i have changed mine

Hello I am new here.....
And i m requesting for help in my Rc boat....
Can anyone tell me that how to use a servo for rudder in my boat..... Plzzz tell me from installing, wiring and any other components needed for runningthe servo....
Plzzz tell me step by step procedure.... 

@anushuranger

please refer the  link https://www.google.co.in/search?q=servo+control+rudder+for+RC+boat&newwindow=1&safe=active&espv=2&biw=1440&bih=775&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiuy8i85ffOAhVJpo8KHfepACsQ_AUIBigB for some reference of how people have connected servo to the rudder

Hello Sanhosh-r... Thanks for ur advice....
Can you tell me one more thing...
Is it compulsory to attach servo with arduino..?

Which is the most simpilar way of using a servo  ...

@anushuranger
Arduino needn't come into the picture if you're not going to automate anything. You need Tx-Rx, rudder servo, ESC and motor for propeller.

Thanks

And that link you have suggested me.... It didn't helped me at all...