RC India

RC Models => Boats => Topic started by: gaurang.1972 on January 05, 2014, 09:29:24 PM



Title: my first scratch build cabincruiser
Post by: gaurang.1972 on January 05, 2014, 09:29:24 PM
hi friends this is my first scratch build cabin cruiser from 3mm form board i use brushless motor and 60 amp brushless esc and 7.4 volt 2500map lipo and she performs good i put cabin light and focus light and control on and off through old 9 gram servo removing motor and connect led +and- wire in motor connection centralize the servo pot and connect servo wire to channel 6 flap knob  


Title: Re:
Post by: sanjayrai55 on January 06, 2014, 06:10:29 AM
Looks good. Put it in the water now!


Title: Re: my first scratch build cabincruiser
Post by: gaurang.1972 on January 06, 2014, 12:19:14 PM
yesterday she was maiden in water and about half throttle she is rocket in just 2 cell lipo


Title: Re: my first scratch build cabincruiser
Post by: VC on January 06, 2014, 02:12:49 PM
Great work done! Please post some better pictures of the model. Do you have a video of the maiden?

I understand that you are looking for a 65cms Cabin Cruiser - why don't you try to build this out of the same foam board?

http://eezebilt.hobby-site.com/Seaprincess.html (http://eezebilt.hobby-site.com/Seaprincess.html)

Regards.