RC India
Welcome Guest, please login or register.
 
Pages: 1 [2]  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #25 on: February 08, 2012, 11:01:15 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



will it works..?  yes..see the video..
Logged

Phoenix.........
 

Read
« Reply #26 on: February 08, 2012, 11:06:09 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



Modelers, now we made a working turret. You can take more time to make a turret according to plan. So, now we can think about a turret with azhimuth elevation of a gun barrel. For our first turret, we took one channel of TX, and all you saw that we can use any channel to control it; and easy.
So, here we need two channel, one for rotation and one for barrel control.

So we can use any TX controls but you can use the right side TX controls for turret control, while the left for prop and direction.

WT-27.jpg
Re: add a working turret to our crafts with an elevating gun..
* WT-27.jpg (90.12 KB, 800x600 - viewed 1032 times.)
« Last Edit: February 10, 2012, 10:07:21 AM by KALYANPRODHAN » Logged

Phoenix.........
 

Read
« Reply #27 on: February 08, 2012, 11:09:12 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



to make a proposed turret we need one sero set up as earlier, and one more micro servo..
place a micro servo, on a foam board, leaving some margin all around..

ET-1.jpg
Re: add a working turret to our crafts with an elevating gun..
* ET-1.jpg (56.92 KB, 800x600 - viewed 1043 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #28 on: February 08, 2012, 11:11:28 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



place and check the servo slot..place the servo from in to out..

ET-3.jpg
Re: add a working turret to our crafts with an elevating gun..
* ET-3.jpg (28.52 KB, 800x600 - viewed 937 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #29 on: February 08, 2012, 11:14:08 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



now draw a circle with compass as shown..
draw a second one also..

ET-5.jpg
Re: add a working turret to our crafts with an elevating gun..
* ET-5.jpg (49.82 KB, 800x600 - viewed 940 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #30 on: February 08, 2012, 11:17:04 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



cut out 4 identical pieces..and fix the servo with a piece of foam bord, thus avoids the glue or screw..

ET-7.jpg
Re: add a working turret to our crafts with an elevating gun..
* ET-7.jpg (54.95 KB, 800x600 - viewed 934 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #31 on: February 08, 2012, 11:20:06 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



start to fix side pieces..
cut out the second circle, and make a drum with paper strips..

ET-10.jpg
Re: add a working turret to our crafts with an elevating gun..
* ET-10.jpg (60.74 KB, 800x600 - viewed 927 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #32 on: February 08, 2012, 11:22:50 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



glue the drum in servo cam..
build the balance..

ET-12.jpg
Re: add a working turret to our crafts with an elevating gun..
* ET-12.jpg (55.81 KB, 800x600 - viewed 916 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #33 on: February 08, 2012, 11:26:21 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



make a barrel according to plan.
here i made the barrel from a straw.
paint with appropriate color.

ET-17.jpg
Re: add a working turret to our crafts with an elevating gun..
* ET-17.jpg (46.7 KB, 800x600 - viewed 879 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: February 10, 2012, 10:07:45 AM by KALYANPRODHAN » Logged

Phoenix.........
 

Read
« Reply #34 on: February 08, 2012, 11:29:02 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



time to fix..and check..

ET-19.jpg
Re: add a working turret to our crafts with an elevating gun..
* ET-19.jpg (62.65 KB, 800x600 - viewed 930 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #35 on: February 08, 2012, 11:33:48 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



how it works. See the cool video here...




Friends, all given ideas are mere keys. You can add any imagination to your turrets or all in to scale. All we know how much time we spent on our models, that much be the finishing, and detailing of our models. See how simple it is to add a working turrets to our crafts. You can also add a gun sound with a simple electronic circuits, have some nice crafts.  Thumbs Up
« Last Edit: February 10, 2012, 10:09:28 AM by KALYANPRODHAN » Logged

Phoenix.........
 

Read
« Reply #36 on: February 09, 2012, 01:27:02 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



Friends,
I got some mail, asking about to extend a servo lead, for turret use. Answering them all individually is tough job, so i am adding here.
Its all simple once again. Usually all we go to buy a servo lead extension, for our use. It is very easy to extend a servo lead, and can extend up to 4 meters, as i worked many with my rail road switching points, and works well..but avoid using low quality wires for this purpose. As the low quality wires can make a good resistance in the path of electrons to the servo, thus the performance is decreased.

So how to extend servo lead, ok, its all simple..

=> take a servo, may be any..micro / heavy / standard with you.
=> cut the leads on half.

SE-1.jpg
Re: add a working turret to our crafts with an elevating gun..
* SE-1.jpg (71.54 KB, 800x600 - viewed 958 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: February 10, 2012, 10:13:25 AM by KALYANPRODHAN » Logged

Phoenix.........
 

Read
« Reply #37 on: February 09, 2012, 05:12:25 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



we can purchase the flat ribbon cables in various colors and densities, so, buy a meter of flat ribbon cable, while keeping the wire color codes of servo leads, in mind, and please do not buy too cheaper wires, but at least in 20: 20 density.
here one meter wire costs RS 20/-

then peel of three wires from flat cables all in to same color codes to servo wire..

SE-3.jpg
Re: add a working turret to our crafts with an elevating gun..
* SE-3.jpg (79.03 KB, 800x600 - viewed 985 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: February 10, 2012, 10:13:56 AM by KALYANPRODHAN » Logged

Phoenix.........
 

Read
« Reply #38 on: February 09, 2012, 05:18:42 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



=> collect some heat shrink tube from any electronic spares shop, in to 3 or 4 mm.
=> its cheap, and costs 20 Rs/- for a meter.
=> we can also use insulation tapes.

peel out the insulation from wires.

SE-5.jpg
Re: add a working turret to our crafts with an elevating gun..
* SE-5.jpg (78.67 KB, 800x600 - viewed 952 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: February 10, 2012, 10:04:53 AM by KALYANPRODHAN » Logged

Phoenix.........
 

Read
« Reply #39 on: February 09, 2012, 05:22:26 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



=> insert the sliced heat shrink tube on to wires about in to the lengths of 1 inch
=> solder all wire tips with a soldering iron
=> make sure the soldering iron is truly Earthed.
=> if not, you can remove the plug, from wall socket, to avoid any high current leakage from iron.
=> this current can damage the micro chip of the servo.       
               take care.

now, after bright solder, pull in tube, to the joints, and heat the tubes with the crest of the soldering iron, you do not need to buy a heating gun for this.

SE-7.jpg
Re: add a working turret to our crafts with an elevating gun..
* SE-7.jpg (92.56 KB, 800x600 - viewed 906 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: February 10, 2012, 10:04:14 AM by KALYANPRODHAN » Logged

Phoenix.........
 

Read
« Reply #40 on: February 09, 2012, 05:25:20 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



=> now make sure the wires are ok.
=> look for any protutions.
=> now the servo is ready for the show.

SE-9.jpg
Re: add a working turret to our crafts with an elevating gun..
* SE-9.jpg (80.92 KB, 800x600 - viewed 954 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: February 10, 2012, 10:14:41 AM by KALYANPRODHAN » Logged

Phoenix.........
 

Read
« Reply #41 on: February 09, 2012, 07:30:49 PM »
sunk?
Boat Lover
Forum Veteran

****

Reputation Power: 6 
sunk? has no influence.
Offline Offline

City: Bristol. UK
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 458
Join Date: Jan, 2010



hi roopeshkrishna
hello mate, Yes I am still about in the back ground, watching your excellent builds....... Smiley
this is a really good tutorial and very useful for those who want 'even more' realism in their models.
well done , very easy to follow steps. Smiley  Hats Off Hats Off Clap Clap

regards
don

Logged

regards
don
UK
 

Read
« Reply #42 on: February 10, 2012, 09:08:10 AM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



yes Sir..all are simple..
Logged

Phoenix.........
 

Read
« Reply #43 on: July 20, 2013, 01:22:16 PM »
Sb_Maharana
Boat Lover
Forum Veteran

****

Reputation Power: 5 
Sb_Maharana has no influence.
Offline Offline

City: Rayagada
State: Orissa
RC Skills: Beginner
Posts: 378
Join Date: May, 2010



Always wanted to make a continuous rotating servo, this is a very good tutorial to do so. I have seen some other tutorials where the pot is replaced with 2.2k resistor, don't know what difference it makes.
« Last Edit: July 20, 2013, 01:42:25 PM by Sb_Maharana » Logged

 

Pages: 1 [2]  All   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
make our own B E C, E S C s for our crafts... « 1 2  All »
Electric Power
roopeshkrishna 34 13701 Last post January 01, 2012, 11:08:37 PM
by roopeshkrishna
make a simple crane for your crafts.. « 1 2  All »
Boats
roopeshkrishna 31 16809 Last post February 04, 2012, 11:34:51 PM
by roopeshkrishna
add a working turret to our crafts in an even more easier way..
Boats
roopeshkrishna 15 8065 Last post April 28, 2012, 10:35:00 PM
by Gokul ravindran
simply convert the CD drive motors for your crafts.. « 1 2 3  All »
Electric Power
roopeshkrishna 54 23292 Last post June 02, 2012, 08:19:30 PM
by roopeshkrishna
why cant we make DJI like stable crafts
Multirotors
hangingtough 11 807 Last post June 12, 2020, 12:58:04 AM
by tonyStark