Hello everybody,

I'm new to this forum. I have made a plane to make a RC hovercraft. But the parts needed to built a RC hovercraft are not available in my country (Bangladesh). So I have made a very simple plan.

I describe it bellow.

I will use a simple RC car's remote and receiver. I don't have any esc. So I will directly connect motors with the batteries and receiver. The receiver have feature to run two motors (clockwise and anti clockwise).

I will use two N2826/08 out runner Brushless motor (KV1900) with 8x4 prop. One for lift and Another for thrust. Is it ideal to use N2826/08 motor for lift and thrust? I'm not sure
.
Link- www.aliexpress.com/store/product/N2826-08-out-runner-Brushless-motor-KV1900-This-motor-has-included-accessories-prop-adapter-mounting-seat/504776_453968471.html

I have managed 6 lipo mobile phone batteries and make two 3s(11.1v) lipo packs.

The lift motor will function to star and stop manually.

The thrust motor will control by the remote with full power.

Instead of using a servo I will use a 3v small motor to control the radar by remote.

My question is-  do the N2826/08 motors have enough power to lift the hovercraft and make enough thrust? Is it ideal not using any esc?

Please suggest some materials to made skirt.

Regards

Anikpro