|
Title: 3 wheeled Rc car Post by: devangflyer on August 18, 2014, 03:19:03 AM Hey guys I am trying to design and make a 3 wheeled Rc car , first prototype is ready , will do the first run tomorrow , specs -
Motor - top star 1400 kv Battery - 7.4 v 1300 mah Esc - 20 amp avionic Servo - metal gear 9g servo ( tried a plastic one , but it got crushed ) Pls share your thoughts guys . Title: Re: Hey guys I am trying to design and make a 3 wheeled Rc car , first prototype is Post by: devangflyer on August 18, 2014, 03:24:18 AM It's a direct drive system .
Title: Re: Hey guys I am trying to design and make a 3 wheeled Rc car , first prototype is Post by: devangflyer on August 18, 2014, 03:25:24 AM If the motor does not perform well , I'll change it to a motor with 700 gm thrust and a 40 amp esc .
Title: Re: 3 wheeled Rc car Post by: Kamalkaensaan on August 18, 2014, 01:11:20 PM Hi Devang , how was your car's test drive ?
Title: Re: 3 wheeled Rc car Post by: Bilal on October 12, 2014, 08:50:08 PM hey Devang,
nice work there mate, I've seen your other mod as well and i must say, your ingenuity is really appreciable. for three wheeled cars, the guy you should be looking upto is Anjan Babu, he is the master of everything with three wheels.... get in touch with him and you'll be amazed. regards Bilal Title: Re: 3 wheeled Rc car Post by: AnjanBabu on October 14, 2014, 06:45:52 PM That's pretty good for your first prototype, you already have a brushless power system and a 2.4 gig radio.
My first car was a wee bit clumsy, running on brushed motor and 27MHz toy car radio. ;) hey Devang, Not everything with 3 wheels, never really been amused by auto rickshaws. ;Dmaster of everything with three wheels Title: Re: 3 wheeled Rc car Post by: K K Iyer on October 14, 2014, 08:14:29 PM @devangflyer,
AnjanBabu sir is too modest. This is what his car looks like: |