RC India

RC Models => Cars => Topic started by: GYU HOBBY RC on May 13, 2021, 02:44:56 PM

Title: Losi LMT monster truck TREAL AXLE UPGRADE BASH.
Post by: GYU HOBBY RC on May 13, 2021, 02:44:56 PM
I tried driving after upgrading Rossi LMT axle metal.
If I run hard and fall, I force it up and test it.
Of course, since it is metal, there is no damage.
There was no gear split that you might not know, and it runs well.
It's not in the video, but the low link bar was torn when I fell during the last run.
I think the link bar should also go to metal.
This is the use of TREAL axle upgrade products.

LMT 4WD Solid Axle Monster Truck

Motor : Hobbywing EZRUN Brushless 4268 SL 2600KV Motor
ESC : Hobbywing EZRUN Max8 V3 150A
Servo : DS3230-180 6.8V 34.5Kg / 0.2Sec
Battery : DXF 14.8V 4S 8400mah 120C HardCase  Lipo battery
             138*47*49mm, 672g
Tansmitter and receiver : FlySky FS-GT5 2.4G 6CH
Body : PROLINE AP3430 2014 Chevy Silverado
Servo Saver : Hot Racing LMJ48SH25 (25T)
Axle part : Front TREAL LMT Axles, Rear TREAL LMT Axles,
                Treal Aluminum 7075 Front Steering Knuckles for Losi LMT

https://youtu.be/0Kri6Kw5c1A (https://youtu.be/0Kri6Kw5c1A)