RC India
Welcome Guest, please login or register.
 
Pages: [1] 2  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: April 17, 2018, 09:09:09 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck




Hi,

Need help to convert HSP 1/10 Nitro Truck into Electric (Brushed)

I already have Brushed ESC
https://hobbyking.com/en_us/hobbykingr-tm-brushless-car-esc-45a-w-reverse.html

Can anyone help to order brushed Motor/Gear/Motor Mount

I am thinking Motor 540
https://hobbyking.com/en_us/mabuchi-rs-540sh-6527-brushed-motor-90w.html
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #1 on: April 18, 2018, 12:03:59 AM »
rishabhbarma
Plane Lover
Forum Hero
*****

Reputation Power: 13 
rishabhbarma has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Intermediate
Posts: 921
Join Date: Mar, 2015



Go brushless, not brushed.
Logged
 

Read
« Reply #2 on: April 18, 2018, 03:04:35 AM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



1:- dont have budget,
2:- I already have ESC.
3:- I dont need speed
4:-brushed motor is cheap

May be I will upgrade it later after successful upgrade from Nitro to Electric
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #3 on: April 23, 2018, 01:16:03 AM »
F.I.M.S presents Rc
Car Lover
Senior Member
***

Reputation Power: 6 
F.I.M.S presents Rc has no influence.
Offline Offline

City: Colyton, devon
State: OUTSIDE INDIA
RC Skills: Expert
Posts: 213
Join Date: Jan, 2018



I converted my sons HSP savagery 1:10 neo truck to brushless

Don't waste your time with brushed, it will never be capable of enough speed.

I used traxxas vxl6 ESC, team orion r8 motor, maxxamps 120c lipo

He loved it





Logged
 

Read
« Reply #4 on: April 23, 2018, 02:00:42 AM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



GThanks

But I dont need much power now.

I m prepating this for my child (4 Year old only)

So looking for slowest speed .....lol
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #5 on: April 23, 2018, 02:09:12 AM »
F.I.M.S presents Rc
Car Lover
Senior Member
***

Reputation Power: 6 
F.I.M.S presents Rc has no influence.
Offline Offline

City: Colyton, devon
State: OUTSIDE INDIA
RC Skills: Expert
Posts: 213
Join Date: Jan, 2018



Ahhh I see.

Try a 600 drill motor from Johnson, you'll need a decent brushed ESC, like a novak rooster or tekin RX

Avoid cheap Chinese brushed esc's

This SCT is running a 20 amp mtroniks 20a, and a 600 drill motor, 2s lipo





Logged
 

Read
« Reply #6 on: April 26, 2018, 02:53:10 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



Thanks for videos but I want to know how to install brused motor in Intro (how to convert nitro car into brushed motor car)
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #7 on: April 26, 2018, 04:58:14 PM »
rastsaurabh
Plane Lover
Forum Hero

*****

Reputation Power: 19 
rastsaurabh has no influence.
Offline Offline

City: Noida
State: Haryana
RC Skills: Intermediate
Posts: 1558
Join Date: Mar, 2012



Hello Gbisht,

As i know its not going to be simple. there is no straight forward kit where you will remove the engine and put a motor.
People may do it but you need solid tools for that, specialized metal pieces to install motor then correct Pinion.

Finding right parts is another big hurdle.

 I would suggest sell it off and buy a decent electric car.

regds
saurabh

Logged
 

Read
« Reply #8 on: April 26, 2018, 10:03:15 PM »
rishabhbarma
Plane Lover
Forum Hero
*****

Reputation Power: 13 
rishabhbarma has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Intermediate
Posts: 921
Join Date: Mar, 2015



Its not that tough, experiment with pinions and get someone to cnc an aluminium mount for the motor. No rocket science here. You can google to checkout a couple types of mounts, and scale it as per your motor. Make sure you're able to adjust the motor to mesh the gears right.
Logged
 

Read
« Reply #9 on: April 26, 2018, 10:10:23 PM »
rastsaurabh
Plane Lover
Forum Hero

*****

Reputation Power: 19 
rastsaurabh has no influence.
Offline Offline

City: Noida
State: Haryana
RC Skills: Intermediate
Posts: 1558
Join Date: Mar, 2012



I hope gbisht you must have understood with this ...

"experiment with pinions and get someone to cnc an aluminium mount for the motor"

regds
Saurabh
Logged
 

Read
« Reply #10 on: April 30, 2018, 07:10:27 AM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



wating for some parts from HK, soon I will update about upgrade.
meanwhile welcome to all for any suggestion,
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #11 on: May 08, 2018, 11:52:39 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



Received 540 Brushed Motor , Gear and Motor Mount today,

but here is new issue now, if I mount motor on motor mount then main supra gear is not touching pinion gear (gear on motor)
need to do some modification or convert it to 4WD to 2WD

Plz suggest, if anyone done this before


Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #12 on: May 23, 2018, 03:41:20 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



Finally I received all ordered parts and after changing in gear box and few adjustment
I am able to fix motor mount on correct location, installed all electronics and its working

BUT......now motor is heating

I am using 7.2V 1500 amh 35C Lipo with below ESC and Motor,
can anyone guide me where is mismatch

Motor
https://hobbyking.com/en_us/mabuchi-rs-540sh-6527-brushed-motor-90w.html

ESC
https://hobbyking.com/en_us/hobbyking-x-car-45a-brushed-car-esc.html


https://ibb.co/cW6qGT
https://ibb.co/euRqGT
https://ibb.co/iLwPbT
https://ibb.co/gphKAo
https://ibb.co/iuhKAo
 
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #13 on: May 23, 2018, 05:30:36 PM »
rastsaurabh
Plane Lover
Forum Hero

*****

Reputation Power: 19 
rastsaurabh has no influence.
Offline Offline

City: Noida
State: Haryana
RC Skills: Intermediate
Posts: 1558
Join Date: Mar, 2012



Firstly Congrates for getting to run it electric.

1. Is motor pinion and spur mesh ok, meaning it should not be too tight.
2. As per the car size motor seems to be small
3. Run motor independently and see it it gets heated. if it is getting heated problem is in setup.
4. what is JST plug for --> Fan, hope you are using good connectors, XT60.
5. I see you have not soldered the wires to motor that can also be the reason for heat. proper connection required.

Keep us updated on progress.
Logged
 

Read
« Reply #14 on: May 23, 2018, 06:34:18 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



Thanks Saurabh Ji,

1. Motor and Spur mesh is OK
2. Motor size is 540 and ok for 1/10 size car
3. will test it and update you...

4. I am using low discharge battery, so I guess JST plug is fine, I can change it to XT60 if its required
5. Motor points are soldered now, still getting heat

Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #15 on: May 23, 2018, 06:48:34 PM »
rastsaurabh
Plane Lover
Forum Hero

*****

Reputation Power: 19 
rastsaurabh has no influence.
Offline Offline

City: Noida
State: Haryana
RC Skills: Intermediate
Posts: 1558
Join Date: Mar, 2012



Hello Gaurav,

4. I am using low discharge battery, so I guess JST plug is fine, I can change it to XT60 if its required
JST is only Ok for 2-3 Amps , I suggest use XT60. although motor heating is not related here.


5. Motor points are soldered now, still getting heat
Heat means Huh? if its warm ( after some 3-5 min run) and you can hold for 20 sec by hand then its ok, motor will get warm while running.
Logged
 

Read
« Reply #16 on: May 23, 2018, 11:53:57 PM »
Shashank9230
Car Lover
Senior Member
***

Reputation Power: 4 
Shashank9230 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Beginner
Posts: 196
Join Date: Mar, 2016



Motor is fine for 1/10 but compare to your car load if you use bigger pinion on motor. Then it also directly increase load on motor and getting hot due to over load. So try to use lower teeth gear on motor or higher no. Of teeth on gearbox.
Logged
 

Read
« Reply #17 on: May 24, 2018, 01:38:48 AM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



I am already using lowest Pinion, 9T/3.17mm 32 Pitch Hardened Steel Pinion Gear
Main Gear I am using is :  Main Gear (48T/32P)
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #18 on: May 24, 2018, 04:57:38 AM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



hi all,

Now I am planing to convert it from Brushed to Brushless setup,
I have selected below ESC and Motor Combo, can anyone help me to guide for slection

Turnigy
---------
https://hobbyking.com/en_us/turnigy-trackstar-waterproof-1-10-brushless-power-system-3000kv-80a.html
https://hobbyking.com/en_us/turnigy-trackstar-waterproof-1-10-brushless-power-system-4000kv-80a.html
https://hobbyking.com/en_us/turnigy-trackstar-waterproof-1-10-brushless-power-system-3520kv-80a.html
https://hobbyking.com/en_us/turnigy-trackstar-waterproof-1-10-brushless-power-system-5200kv-80a.html

TrackStar
----------
https://hobbyking.com/en_us/trackstar-roar-approved-1-10th-stock-class-brushless-esc-and-motor-combo-13-5t.html
https://hobbyking.com/en_us/trackstar-roar-approved-1-10th-stock-class-brushless-esc-and-motor-combo-17-5t.html
https://hobbyking.com/en_us/trackstar-roar-approved-1-10th-stock-class-brushless-esc-and-motor-combo-21-5t.html
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #19 on: May 24, 2018, 12:23:53 PM »
rastsaurabh
Plane Lover
Forum Hero

*****

Reputation Power: 19 
rastsaurabh has no influence.
Offline Offline

City: Noida
State: Haryana
RC Skills: Intermediate
Posts: 1558
Join Date: Mar, 2012



I am not discouraging but brushless would require more smooth and accurate gear mesh.

As you shared video the mesh is not at all OK for fast speed run.
Logged
 

Read
« Reply #20 on: May 24, 2018, 06:35:10 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



Saurabh Ji,

Thanks for valuable feedback,
I am ordering other pinion for accurate fit, and not install BL untill I will able to reach smooth mesh.
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #21 on: February 23, 2020, 09:18:14 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



Hi All,

I am writing and starting this thread again, after a long time I got change to work again on my Nitro to Electric 1/10 Truck

Mostly things are fine but having two main issues

1. Motor Heating
2. Pinion gear is not as per Spur gear

I need help to identify correct size of Pinion gear according to my spur gear (let me know how to identify it)
or
I can change both if any one suggest me any set
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #22 on: February 24, 2020, 11:57:31 AM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



Update

After searching couple of videos on youtube, I have identified correct Module & Diametral Pitch of pinion I required


Gear box image :
https://ibb.co/LNt3xyd
Need help to convert HSP 1/10 Nitro Truck into Electric



I have brushed motor which have 3.175mm Shaft
and pinion I need 1.0M with 3.175mm shaft and 25.4 pitch size

So I am getting only below pinion which is fulfilling my requirement but it have 22T Teeth (which seems more for a pinion) not sure
https://hobbyking.com/en_us/22t-3-175mm-m1-hardened-steel-pinion-gear-1pc.html

Now I have below doubts
1. Is my Gear setup is correct ?? (As I am modifying it from Nitro to Electric and dont need much speed)
2. Can I use new pinion (22 Teeth) with my gear setup ?? link below
https://hobbyking.com/en_us/22t-3-175mm-m1-hardened-steel-pinion-gear-1pc.html

Please advice your expert comment ....Thanks


Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #23 on: February 24, 2020, 01:28:09 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



Can Anyone help me to get pinion with

Pitch: 1M or 1.0M
Shaft Hole : 3.175mm

Teeth : 9T or 10T or 11T or 12T and so on less then 16T

Modified Gear setup
https://ibb.co/Jr6j4k1
Need help to convert HSP 1/10 Nitro Truck into Electric
« Last Edit: February 24, 2020, 02:45:26 PM by gbisht » Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Read
« Reply #24 on: February 29, 2020, 06:17:14 PM »
gbisht
Car Lover
Forum Hero

*****

Reputation Power: 9 
gbisht has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 668
Join Date: Mar, 2011

My Recent Buy ThunderTiger 1/10 SSK V2 Nitro Truck



I checked at hobbyking and found mostly motors have 3.175mm shaft
but they are not selling 3.175 mm pinion, most pinion are 5mm bore

and I am getting 5mm shaft size only in 1/8 scale motors,

Can anyone suggest, or have 3.175 mm 1.0M pinion in his spare section
Logged

HSP 1/10 Nitro Tyrannosaurus Off-Road Truck
Thunder Tiger 1/10 SSK V2 Nitro Truck with Radio
HK-300 3 Channel 2.4ghz FHSS Ground Radio
Turnigy 9x 8-Channel
HK-250GT
 

Pages: [1] 2  All   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Want a Used Mugen MBX6 to Convert to Electric
Wanted
xplosifly 0 2149 Last post May 11, 2010, 12:12:59 AM
by xplosifly
Where to buy an electric truck
Cars
Sreedhar 9 5734 Last post June 19, 2010, 10:37:26 AM
by Sreedhar
.07 size nitro engine for hsp 1/16 nitro truck
Cars
rc ram 1 3745 Last post February 29, 2020, 06:18:07 PM
by gbisht
.25 nitro engine to convert electric help
RC India Forum
hiteshkher 1 2656 Last post April 09, 2016, 12:19:50 AM
by kewal kalsaria
1/10 HSP (94111) Nitro and electric truck for sale
For Sale
GTR 5 1878 Last post December 02, 2019, 03:03:21 PM
by GTR