|
Title: screw driver, tools help for building 1/10 scale ARTR buggy Post by: sim_tcr on February 07, 2018, 06:00:09 PM Hello,
I am building up my first 1/10 scale ARTR buggy from a kit. And there are different type of screws in the kit (photo attached) can some one help me good screw drivers to use on them, if you can let me know the specs or direct link to purchase them would be great. For some of the screws in photo, I think I can use [url=https://www.amazon.in/Stanley-6923022-10-Piece-Imperial-Allen/dp/B00O3YL8I2?tag=googinhydr18418-21]]https://www.amazon.in/Stanley-6923022-10-Piece-Imperial-Allen/dp/B00O3YL8I2?tag=googinhydr18418-21] (http://[/url)https://www.amazon.in/Stanley-6923022-10-Piece-Imperial-Allen/dp/B00O3YL8I2?tag=googinhydr18418-21 (https://www.amazon.in/Stanley-6923022-10-Piece-Imperial-Allen/dp/B00O3YL8I2?tag=googinhydr18418-21). can some one confirm that as well? There is also a bolt which has to be removed, put the wheel on then put the bolt back outside the wheel, what tool is needed to do this? Thanks. Title: Re: screw driver, tools help for building 1/10 scale ARTR buggy Post by: rishabhbarma on February 07, 2018, 06:29:24 PM Couple of things you need- set of wrenches- get ones with 1/4 inch hex shank.
And a handle for the heads. Later you can buy an electric screwdriver and use these wrench heads with screwdriver as well. Also get a good set of Allen hex drivers. You can get any cheap titanium ones (~15$ for set of 4). You can whatsapp me on 8697468905 I'll send you the links- also - I'm into cars as well, would be good to stay in touch. Regards Rishabh Title: Re: screw driver, tools help for building 1/10 scale ARTR buggy Post by: Kantesh on February 07, 2018, 07:39:50 PM u need torxset
|