RC India

General Topics => Chatter Zone => Topic started by: Aravind298 on February 19, 2018, 05:18:26 PM



Title: Arduino: Communication Basics
Post by: Aravind298 on February 19, 2018, 05:18:26 PM
Greetings to all!

Most of the beginners to arduino, struggle to make complex programs/robots due to a slight inefficiency in their knowledge.

I've attached a few videos, which focuses on the communication & data storage capabilities of Arduino. Do check them out.

I2C

https://www.youtube.com/watch?v=GJX0BRUagCg&list=WL&index=14&t=18s

SPI

https://www.youtube.com/watch?v=1nO2SSExEnQ

RFID

https://www.youtube.com/watch?v=gIlSLwcbeTU&list=WL&index=15&t=0s

GPS

https://www.youtube.com/watch?v=TtZEZYQG0xk&list=WL&index=16&t=0s

SD card reading and Datalogging

https://www.youtube.com/watch?v=5v5A3j7Rrco&list=WL&index=17&t=230s



Hope that helps  :hatsoff:


Title: Re: Arduino: Communication Basics
Post by: Chiragthelegend12 on February 19, 2018, 05:25:29 PM
Thanks For This.
Hoping to do something with arduino in the summers!

 :hatsoff:


Title: Re: Arduino: Communication Basics
Post by: rcrcnitesh on February 19, 2018, 06:18:53 PM
Thank you. I was thinking about getting into the world of arduino and programming. This will be a great starter platform.


Title: Re: Arduino: Communication Basics
Post by: Chiragthelegend12 on February 19, 2018, 07:01:17 PM
I think this shall be made sticky!! ;D


Title: Re: Arduino: Communication Basics
Post by: Aravind298 on February 19, 2018, 08:30:31 PM
I think this shall be made sticky!! ;D

Pardon? Didn't get you.


Title: Re: Arduino: Communication Basics
Post by: Dharmik on February 19, 2018, 08:45:23 PM
He says this thread should be sticky (always on top). :)


Title: Re: Arduino: Communication Basics
Post by: Aravind298 on February 19, 2018, 08:47:06 PM
oh yeah. I'll take that as a compliment.

Thanks :hatsoff:


Title: Re: Arduino: Communication Basics
Post by: Aravind298 on February 19, 2018, 08:48:59 PM
I'll continue sharing such contents.

I couldn't make them, mainly because I'm not creative enough. Then, at the end of the day, why reinvent the wheel? ;D