Title: C10 2900KV Micro Brushless Motor-whether propellerholder can be installed on it Post by: kamalsahai on May 26, 2018, 07:08:33 PM i want c10 micro brushless motor with propeller holder for my small plane and therefore i selected the same. but i am not sure whether propeller holder can be installed on it.
if any body has used c10 motor with propller holder let me know. kp Title: Re: C10 2900KV Micro Brushless Motor-whether propellerholder can be installed on it Post by: kamalsahai on May 27, 2018, 09:58:32 AM reply forum members
Title: Re: C10 2900KV Micro Brushless Motor-whether propellerholder can be installed on it Post by: flymachine on May 27, 2018, 10:04:11 AM You can do that using a 2mm prop. adapter.
https://hobbyking.com/en_us/prop-adapter-w-steel-nut-m3x1-5mm-shaft-grub-screw-type.html Title: Re: C10 2900KV Micro Brushless Motor-whether propellerholder can be installed on it Post by: flymachine on May 27, 2018, 10:05:39 AM link above is only for reference, just look for 2mm motor shaft adapter
Title: Re: C10 2900KV Micro Brushless Motor-whether propellerholder can be installed on it Post by: kamalsahai on May 27, 2018, 10:10:03 AM flying machine sir
means 2 mm propeller adapter fits on its kp Title: Re: C10 2900KV Micro Brushless Motor-whether propellerholder can be installed on it Post by: flymachine on May 27, 2018, 10:13:55 AM If you got this motor then its 2mm shaft.
https://hobbyking.com/en_us/c10-micro-brushless-outrunner-2900kv.html?___store=en_us Just google too if you remember where you got your motor from, usually this should not change with different manufactureres for this size, but good to refer to the source & best would be if you can acually measure the dia of the shaft. |