RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: August 13, 2019, 09:58:10 PM »
DR1GUY
Plane Lover
Active Member
**

Reputation Power: 1 
DR1GUY has no influence.
Offline Offline

City: Pume
State: Maharashtra
RC Skills: Beginner
Posts: 6
Join Date: Aug, 2019




Hello Everyone,

I am new in the RC space. I am building the quadcopter, we are using EMAX 650 motors, 30A SIMONK ESC, NAZA M LITE and flysky FS i6ab. Did all connections, calibration and binded Tx with Rx. Then powered it but the motor does not spin.  Following things we did-

1. Direct connected ESC to Rx- Motors are rotating.
2. Removed 2A supply pin from ESCs - No effect
3. Did few recalibrations- No effect

Naza m lite  LED- Red Red Red Green @ GPS ATTI.
Beep - Beep only when power is plugging in.

Kindly help.
Logged
 

Read
« Reply #1 on: August 13, 2019, 11:17:44 PM »
Mohammed Naveed
Plane Lover
Forum Hero
*****

Reputation Power: 14 
Mohammed Naveed has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 893
Join Date: Jul, 2015



Hi welcome to the forum and to the hobby!

I suggest you remove the propeller from your quad will doing all these test!

 for the motors to spin you need to arm the quad,
This is done by holding the remote control sticks as the picture shown!

Once done the motors will spin and increase throttle!

Disarming is also same as arming!
Regards,
Naveed

Screenshot_20190813-231454.jpg
Re: FACING ISSUE IN NAZA M LITE MOTOR ARMING
* Screenshot_20190813-231454.jpg (48.55 KB, 800x367 - viewed 943 times.)
Logged
 

Read
« Reply #2 on: August 14, 2019, 10:53:42 AM »
DR1GUY
Plane Lover
Active Member
**

Reputation Power: 1 
DR1GUY has no influence.
Offline Offline

City: Pume
State: Maharashtra
RC Skills: Beginner
Posts: 6
Join Date: Aug, 2019



Thank you Mohammed,

I tried the same, no effect.

The ESC's are beeping only at the start. I have seen more than 50 videos to understand connections tried the same but motors are not spinning after connecting to NAZA m lite.

Am I missing something?

Logged
 

Read
« Reply #3 on: August 14, 2019, 12:40:04 PM »
Mohammed Naveed
Plane Lover
Forum Hero
*****

Reputation Power: 14 
Mohammed Naveed has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 893
Join Date: Jul, 2015



Can you upload a pic of your Rc setup page of the dji assistant app.

You can whatsApp me as well at 7022216674
Logged
 

Read
« Reply #4 on: August 14, 2019, 09:39:48 PM »
DR1GUY
Plane Lover
Active Member
**

Reputation Power: 1 
DR1GUY has no influence.
Offline Offline

City: Pume
State: Maharashtra
RC Skills: Beginner
Posts: 6
Join Date: Aug, 2019



PFA images for reference.

Thanks in advance.

4.jpg
Re: FACING ISSUE IN NAZA M LITE MOTOR ARMING
* 4.jpg (85.06 KB, 800x600 - viewed 932 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Read
« Reply #5 on: August 14, 2019, 09:49:13 PM »
Dharmik
Heli Lover
Forum Hero

*****

Reputation Power: 13 
Dharmik has no influence.
Offline Offline

City: Bharuch
State: Gujarat
RC Skills: Beginner
Posts: 1097
Join Date: Sep, 2011



Hi,
have you calibrated and set end points using Rx only? If you still facing problem set motor startup to med or high.
Logged
 

Read
« Reply #6 on: August 14, 2019, 11:21:58 PM »
saurabhhsrivastavaa
Default
Plane Lover
Forum Hero

*****

Reputation Power: 14 
saurabhhsrivastavaa has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Intermediate
Posts: 1181
Join Date: Aug, 2009



Your rudder channel is not neutral.
Logged

Cheers !!!
Saurabh
+91 7977382130
 

Read
« Reply #7 on: August 15, 2019, 11:51:33 AM »
DR1GUY
Plane Lover
Active Member
**

Reputation Power: 1 
DR1GUY has no influence.
Offline Offline

City: Pume
State: Maharashtra
RC Skills: Beginner
Posts: 6
Join Date: Aug, 2019



Hi Dharmik,

calibrated the same using Rx and tried different motor speeds.

1. ESC that I am using has a response rate of 490hz and Naza can support only up to 400hz. Is this an issue?
2. The beeping sound is coming during power-up & after that no beeping sound.

for the reference, I am attaching the video link-https://drive.google.com/file/d/1cWn61dYBO1Olsfc-yA8NLEWxt7nLBAIw/view?usp=sharing



Logged
 

Read
« Reply #8 on: August 15, 2019, 11:52:43 AM »
DR1GUY
Plane Lover
Active Member
**

Reputation Power: 1 
DR1GUY has no influence.
Offline Offline

City: Pume
State: Maharashtra
RC Skills: Beginner
Posts: 6
Join Date: Aug, 2019



Saurabh, It is neutral.
Logged
 

Read
« Reply #9 on: August 15, 2019, 03:58:42 PM »
Dharmik
Heli Lover
Forum Hero

*****

Reputation Power: 13 
Dharmik has no influence.
Offline Offline

City: Bharuch
State: Gujarat
RC Skills: Beginner
Posts: 1097
Join Date: Sep, 2011



Hi I saw your video. From video it looks like everything is properly connected but may be something is not done correctly.

1. check wiring for any loose contact
2. as I remember there is motor spin test. check that are the motors responding correctly?
3. keep the F.C. in normal or ATTI mode.
4. check if any channel is reversed or not.
if above points are not the case then probably your escs need to calibrate separately one by one as they are not detecting ARM. to do that
connect single esc to the motor (no props). ESC signal plug to throttle channel of Rx.
1. put throttle to the max and power on the tx
2. power on Rx(esc all together). you will hear beep sound which stores the end point.
3. now bring the throttle stick down again you will hear sound. now increase throttle to see if motor spinning.
4. do this for rest of the escs and then connect them to the naza and see if it's working or not.
Logged
 

Read
« Reply #10 on: August 17, 2019, 05:08:59 PM »
DR1GUY
Plane Lover
Active Member
**

Reputation Power: 1 
DR1GUY has no influence.
Offline Offline

City: Pume
State: Maharashtra
RC Skills: Beginner
Posts: 6
Join Date: Aug, 2019



Thank you, Dharmik.

The issue was sorted out. Did the following things

1. Calibrated ESC's as you told.
2. Rebind the TX and RX.

Thank you, everyone, for giving your valuable time.
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
flip issue with naza lite.
Multirotors
gunnu 12 7974 Last post January 27, 2015, 11:51:43 AM
by gunnu
upgrading to 5045 from 5030 and facing an issue
Electric Power
Darshan for multirotors 12 6295 Last post June 11, 2015, 10:19:17 PM
by K K Iyer
DJI Naza M Lite + GPS Combo Multi Flyer Version Lite DJI NAZA MG Lite Flight Con
For Sale
ritik harbola 3 3894 Last post May 04, 2018, 05:57:40 PM
by ANAND BARVE16
Naza M Lite Arming Issues « 1 2  All »
Multirotors
RC4MIAN 32 5932 Last post July 29, 2021, 11:08:19 PM
by RC4MIAN
Probem arming esc naza m lite
RC India Forum
Simover 4 1478 Last post November 14, 2022, 04:24:34 PM
by Simover