Hi,
First BAD NEWS
=============
All the Tx/Rx set gone.
9gm servos price is no longer cheapest
Good News
=============
After long waiting rubber based products are in display though without complete spec.
But hope, weight and type will be added very soon.
However, 6" or 8" propellers are not available. and even 1/16 rubber too.
====================================================
We want
====================================================
I think, rubber MAT for cutting balsa or wood, TAN sport rubbers of different sizes are required to us.
I have used many rubbers even defective rubber toundicates. But the best rubbers I got from Soikatda of this forum, TAN Sport or TAN-II.
Now, in the rubber items, motor lubricant, rubber strippers, rubber mats, etc. are required and, making a good rubber powered or free flight glider is not as easy as assembling an RC Plane. So, local rubber item shops are required with local cheap items in quantity. Look, you can purchase local plastic toys with same amount of plastics at much much cheaper price. Though prop needs balancing, it easily can be made at user's point and price can be reduced. But as the imported items are IMPORTED, their are costlier.
-=========================================================================
Can anyone give me defective micro servos with Motor? for micro glider. Opening a new servo is difficult to me as I can make but destroy gives mental pain.
Because,
Does anyone make any cell phone pager motor powered paper glider ? With 50mAh Lipo!
Just try it. You can get items at your nearest cell-phone repair shop and if you have friendship, at least he can not cheat you. I make the prop (20xunknown prop in mm) with Shirt plastic support, cut by Nail cutter and sanding with Diamond file. Center hole made with 6 watt soldering iron but you can use a small needle too. Balancing of Prop is Vital and so pitch adjustment so that it can run at 1/2 to 1/3rd of motor's maximum power (I have burnt brush of 2 motor just overloading it). opening vibrator stub is another issue.
Vibrator Motor=> 35 to 40/-
Bluetooth headset rechargeable LiPO battery =>90/-
Cellphone micro sliding switch => 15/-
You can avoid switch using cellotape switch. >
As a paper model, have to dismantle everytime and paper goes to Scrap. Will post pic. next time.
As this is different from RC, so posted in Chatter zone.
Being a interesting to you with less cost involvement, you can try and So I post.
Thanks for reading a long tedious valuless post.