|
Title: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: merog on January 04, 2010, 10:34:09 PM Dear Fellas,
am very happy to share with you all that I Won Hyperion Enigma Design Contest! The contest started here- http://www.rcgroups.com/forums/showthread.php?t=1134184 My Design is here- http://www.rcgroups.com/forums/showpost.php?p=13592797&postcount=19 And the winner confirmation is here- http://www.rcgroups.com/forums/showthread.php?t=1134184&page=3 Thank you very much for patient reading! I would be grateful if you comment on the design. Awaiting comments... Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: Rao on January 05, 2010, 12:03:45 AM congratulations {:)} {:)} {:)} {:)} {:)}
Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: me-my-parts on January 05, 2010, 12:08:56 AM hey merog, hats off :salute:
You really got a creative vision and good skills keep it up. Hope you make more interesting designs in future. best of luck :thumbsup: Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: VC on January 05, 2010, 01:18:50 AM Congrats Merog and Pickle! Is that our Pickle? Well done both of you! Hats off!!! :salute: :salute: :salute:
VC Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: VC on January 05, 2010, 01:23:09 AM What I meant was that, are Pikle6 and Pickle 72 one and the same person?
Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: anwar on January 05, 2010, 03:08:31 AM Congrats Merog !
Looks like this is some other Pickle72 who placed himself in Illinois USA, and our Pikle6/Subbu is in Mumbai, busy with his exams. Haven't seen him for a while now. Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: merog on January 05, 2010, 07:16:59 AM Thank you very much guys...
Unfortunately that Pickle72 is not our Pickle6, The Subbu! Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: vinay on January 05, 2010, 08:43:40 AM BEAUTIFUL!!!! {:)} {:)} {:)} {:)} {:)}
Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: atul_pg on January 05, 2010, 08:54:56 AM Mergo great stuff man. Congratulations for making a mark abroad, in btwn whats your real name ?
Congrats again.. keep on winning ! Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: sushil_anand on January 05, 2010, 11:16:31 AM Merog.
This is absolutely fantastic news ! {:)} {:)} Keep up the good work . :thumbsup: Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: tg on January 05, 2010, 11:49:44 AM Hi Merog,
Could you post some similar decal design for us builders to use?? Do you mind any of using these beautiful designs on our planes?? Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: tg on January 05, 2010, 11:59:41 AM Also, can any one post how to transfer decal designs for application to an airframe. How do you'll print these (I have an inkjet printer). But what material is used to print the decals on.
Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: merog on January 05, 2010, 01:32:42 PM Mergo great stuff man. Congratulations for making a mark abroad, in btwn whats your real name ? Congrats again.. keep on winning ! Thanx Atul. My real name is Apta Chaitanya. But am popular as 'Merog' all over the world. My designs are already with so many organizations world wide. Please check www.merogdesign.com if you have time! Thank you once again! Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: merog on January 05, 2010, 01:59:44 PM Also, can any one post how to transfer decal designs for application to an airframe. How do you'll print these (I have an inkjet printer). But what material is used to print the decals on. Dear tg, Actually decals like cockpit, Logos, Some Markings on the plane can be printed on A4 Sheets with your ink jet. But if it comes to airplane covering there are some methods. One is Printed Film Covering. The entire design will be printed on covering films and then they are carefully pasted to the plane airframe. This can only be done at the printing press. Another method is Laminating Film covering. If the design is simple, then based on the design, various colored laminating films are taken and they are cut according to the design and are pressed on the foamie with laminating iron. This can better be done on foamies. And based on the complexity of the design, we can make the covering by 'film-on-film' method. Some instructions about the covering: http://www.hobbycity.com/hobbycity/store/wikishow.asp?idwiki=45 Some covering films for sale are here: http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6699&Product_Name=Covering_Film_Solid_Bright_Red_%285mtr%29_102 Some videos too: http://www.youtube.com/watch?v=Ey8-ICNIzUs&NR=1 http://www.youtube.com/watch?v=1G4Qfv_Zcl4 Hope this helps. Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: izmile on January 05, 2010, 05:37:28 PM Congrats!... Wish you many more success to follow... :thumbsup:
Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: sahilkit on January 05, 2010, 06:58:40 PM way to go bro {:)}
Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: martian2121 on January 05, 2010, 09:03:48 PM cool man........... we are steadily edging into the global rc scene......... u rock..... Congratulations....
Title: Re: Happy to share with ya all that I Won Hyperion Enigma Design Contest! Post by: merog on January 05, 2010, 09:28:41 PM cool man........... we are steadily edging into the global rc scene......... u rock..... Congratulations.... Thanks Martian, that graphic rocks! Nice to meet you, another artist. |