Hello, I had a flight one evening, Next day when I tried arming the quad, It wouldn't arm. When I dug inside it was seen that the rx wasn't working. It wouldn't light up and it was getting extremely hot. It was the crystal oscillator which was getting hot. So I changed it with the same oscillator from my old broken rx. After that a chip on the board got hot. So I went to a soldering expert and got it changed thinking perhaps it will work. After the changing of chips, The rx would now blink when I plug in the bind plug. But no matter what I do, It wouldn't bind to the tx. Any help is much appreciated 😊. (Attaching Photos of the chip which I changed)
Regards & Thanks
Shuraim
Print
