Here are the electronics that i am using
S500 frame
DJI naza M-lite with gps
700kv Racerstar br3508motors
50 a hobbywing ESC
5200mah orange 4s lipo battery (for powering the motors and MCU)
Flysky TH-9X transmitter and receiver
EKEN action camera
I was flying my drone at the height of 20-30 metres, when out of no where a eagle appered and it came too close that my hand was also shaking.
i dont know what happend but the fell on the ground too hard.
The second motor is hard to turn(maybe the bearing is damaged).
the landing gear of the frame is broken and the PCB of the Frame is also cracked.
the battery was also damaged it swelled up.
the action camera screen is also broken
I noticed was that the positive terminal wire of the 4th motor esc was detached and the solder joint of the motor to esc were also broken.
i dont know why this happend.
currently my class 12 board exam are coming so i cannot repair my drone now. i will repair it later.
please help me out that why this happend.
i was thinking to use Tarot iron man 650 frame.
Thank you.
i want to use the turnigy lipo battery this time. from where should i buy these battery. and which esc and motor should i use for the tarot frame.