Title: Rc glider plan Post by: arfazy on July 15, 2012, 07:40:41 PM Hello
I have a spare Motor: 1822/2600KV brushless out runner motor . I was thinking to build a foamy glider or plane but no idea which plan to build Anyone help pls Title: Re: Rc glider plan Post by: VC on July 15, 2012, 08:06:58 PM You've answered your own question in this thread, post no.8:
http://www.rcindia.org/electric-planes/my-new-%27high-wing-trainer%27/msg109171/#new Your motor seems perfect for this, you may need a higher cap battery, say 1000mAh 3S. 3 X 9gm servos, prop and landing gear. Go for it! :thumbsup: Title: Re: Rc glider plan Post by: rastsaurabh on July 15, 2012, 08:28:52 PM Vc sir, dont you think the RPM for his motor are on higher side for a slow flyer...... Motor will draw high amps with large prop. Such high rpm motors should give good results with smaller prop and pushed setup!!!!
This is my view.....seniors can advice better. Title: Re: Rc glider plan Post by: rastsaurabh on July 15, 2012, 08:37:41 PM Also its micro motor
Title: Re: Rc glider plan Post by: VC on July 15, 2012, 09:18:17 PM My observation was based on post no. 242 (by the designer himself) on this page:
http://www.rcgroups.com/forums/showthread.php?t=1281056&page=17 Title: Re: Rc glider plan Post by: arfazy on July 16, 2012, 09:57:01 AM thank you very much for the reply . but still i am confused which one to go. this is the first time I'm trying to build one
|