Title: Rc plane thust requirement Post by: Aryand on June 24, 2018, 10:50:27 AM I am a beginner in rc planes. I am building a plane (airbus a320 model) which will weigh approximately 2-3 kg. What is the thrust i will require to fly it properly ??
Thanks. Title: Re: Rc plane thust requirement Post by: Mehul Anand on June 24, 2018, 03:22:45 PM At least 1.5 kg if 2kg plane...
But being a beginner you must not build it dont try you will mess up badly try theft alpha.... I say again beginners should not make 2 kg plane... And the motor with that thrust will cost a lot... Build flite test's ft alpha... If you don't know about flite test search on YouTube and see it's beginners series if you haven't.... Title: Re: Rc plane thust requirement Post by: knvshrm on June 24, 2018, 03:31:12 PM At least 1.5 kg if 2kg plane... If the plane weighs 2kg and thrust is 1.5 kg then how can the plane fly ? For this get a low kv motor swinging a big prop.Regards Title: Re: Rc plane thust requirement Post by: Mehul Anand on June 24, 2018, 04:14:07 PM Even if thrust is half the weight a plane can fly..
When both are equal then vertical takeoff.. Title: Re: Rc plane thust requirement Post by: sanjayrai55 on June 24, 2018, 04:15:37 PM At least 1.5 kg if 2kg plane... If the plane weighs 2kg and thrust is 1.5 kg then how can the plane fly ? For this get a low kv motor swinging a big prop.Regards I can comfortably take-off, fly and land a model weighing 2 kg with a power unit producing 1.2 Kg thrust Just go back to basics - lift is not the same as thrust. If you want to climb vertically, only then thrust > weight That said, do not underpower! Always safer to have thrust:weight around 1 for trainers, 1:1.2~1.5 for sports models, and 1> 2 for 3D models Title: Re: Rc plane thust requirement Post by: Aryand on June 24, 2018, 04:18:52 PM Thanks for the reply
Title: Re: Rc plane thust requirement Post by: Mehul Anand on June 24, 2018, 05:00:32 PM Np but just don't make the airbus...
Title: Re: Rc plane thust requirement Post by: kn8alpha on July 30, 2018, 08:12:46 PM deleted
|