|
Title: Want to mix rudder and rear servo in RCB OS 10 Transmitter....How to do? Post by: lalitrc on June 30, 2017, 09:35:54 AM Just upgraded to a new RCB OS 10 Transmitter and now i am making a new plane with directional rear wheel.
I have added a servo to the rear wheel of plane to taxi the plane before and after the flight... The servo is inserted in channel 5 and i want to move the rear wheel servo with rudder stick. means when rudder is moved the wheel servo should also move so someone pls help me that how can i mix the channel 4 and channel 5 On RCB os 10 transmitter? i know that a y connector can be added in channel 4 and then attached to rudder servo and wheel servo but mixing woul be better for me so pls someone tell me if it could be done......? Title: Re: Want to mix rudder and rear servo in RCB OS 10 Transmitter....How to do? Post by: SanjayMoyal on June 30, 2017, 04:31:06 PM you can use one servo control rudder and nose gear and rear
Title: Re: Want to mix rudder and rear servo in RCB OS 10 Transmitter....How to do? Post by: tushar50 on June 30, 2017, 04:56:43 PM You can use a 'Y' servo lead with two connectors on one end which connects to 2 servos and the other end with one connector which connects to the rudder output on your reciever.
|