Forum members,
Anyone who wants to pre-order http://rcbazaar.com/products/397-fs-th9x-9ch-24ghz-transmitter-receiver.aspx the FS-TH9X 9ch 2.4GHz transmitter & 8ch receiver will be charged at Rs 4200 only
Please note the following
- The deadline to pre - order is on or before October 6th 2011 (any orders post this date will not be taken)
- All orders needs to be pre paid by bank transfers or cash only (no credit card or debit cards will be taken for this offer)
- The radios are expected to arrive 1st week - 2nd week of november 2011
- We will accept the orders only when we reach a total quantity of 50 radios (minimum), However if we dont reach this number your money will be refunded on october 8th 2011 (By bank transfer to the same account number that you paid us or people who paid by cash will be refunded by cash.. a proforma invoice will be given to all buyers)

if you have any queries pls email me at enquiry@rcbazaar.com or call us on Tel: 080-41738892 http://rcbazaar.com/VisitOurStore.aspx

I will keep pushing this thread to the top every 2 days so apologies for any inconvenience caused

A good offer of any one who wants to place a bulk order or for reselling these radios.

regards
Sujju

That is a close to Rs500 discount... great !

Good Initiative.......i Wish i could continue my flying....

I will book only one for me. Mailed RCBazaar for detailed information like shipping cost and bank transfer details.

Can I Transfer the money from debit card via ATM? (If any little increase in cost, I can manage). More of that I don't need the money back, but the thing even at regular price.

Again, while you are selling RTFs at 6.5K, why not sell electronics in bundle offer ? low cost motors, escs and servos are all out of stock.

They will be cheapest and hastle-free to us.
You can make same drive for Rs.150 SERVO also and surely will be flooded with offers I think.

Thanks.

Are there any plans for ER9x firmware which were discussed earlier

ER, TH RadioClone, Turnigy V2 - this radio seems to have a whole lot of firmware options available. Kind of reminds me of the various flavors of Linux.

Been downloading a lot of manuals and reading materials, but most of the folks are only discussion how easy it is to program, but the programing itself seems complex. Could not find a guide on the steps to do various common mixings - like dual aileron, elevon, taileron, vtail etc. that are normally found in the likes of Spektrum.

Secondly, since the firmware is evolving, one would need to have the programming port plugged in to change the firmware.

Thirdly, the model memory being less, the ER update calls for a SD card slot as well.....

Was looking at this radio for the additional channels it provides at a reasonable price, but not sure I can handle all this complexity.

However, I do wish that someone in the forum addresses these issues.

@pankaj. There is a complete guide for ER9x in youtube. The complete series shows everything you need.
It is good if some local rc shops stock the solderless programming kit so that it would be easy for us to upgrade to custom firmware

thanks kalyan... it would be ideal if you can pay by NEFT bank transfer other wise we wnd up paying 4% as merchant fee on every transaction and with pricing like this margins are wafer thin for us to operate... regarding the combos.. am sorry i dint get your message... do you mean that we make a combo of motors, esc and servos???.. if this is the query then the combination will be quite large (or we just have combos for beginners planes with an AUW of 800gms to 1.5kgs?)

foamybuilder, we tried and did succeed in getting the new software but this method was done by soldering. What we wanted was a solder less programming technique for which we did get the pogo pins and the sparkfun programmer too (we also did create pcb's for the same).. however we still are having lots of issues on setting up the pogo pins in the right place and they are very fragile and do not solder easily to the pcb... if anyone from bangalore is ready to give us a hand on this it will be great as we dont want to open each radio and solder the cables to change the programming of the radios... also customers dont like this either when they see some soldering on their radios (if they open it up)...they might end up thinking that we are making these radios in our backyard :-)   

@RCBazaar,
can't you get your source to build in the programming port? since this radio is based on the principle of constantly evolving FW, it would be a better feature in any case.

@RCBazaar, I was talking of stocking this kit from smartieparts  
http://www.smartieparts.com/shop/index.php?main_page=product_info&cPath=3&products_id=331.
This doesnt require  any soldering as long as the board is second generation as specified here http://www.smartieparts.com/shop/index.php?main_page=page&id=8. Selling this board alone or radio + er9x for extra cost will be great ( I have ordered this board anyway and will update if the process of upgrade goes smooth)

I mean to say electronics of RTFs or ARFs including Motor, ESC, Servo, Battery, Chargers, Props (with spare), [Horns, Pushrods, linkage stoppers, clevis, snap connectors, snap on link, hinges optional]. All models may not be there, but somethings we need to purchase at low cost and low transportation too.

  There may be limited combo offers a) for 800gms & for 1.5KG, (Medium/Slow).

Or you can say, combo offers for particular models or for specific planes, or you can say, RTFs/ARFs without body (!). At least there will be something that can be made by hand that multiples the fun.

As when the "self made flute sounds and self made kite flies there should ne unlimited JOY."

In ARFs or REFs, we miss SELF-MADE portion. The motors/ESCs used in RTFs never sold separately, but to popularize the hobby, this low cost things are very much required.  

As i wrote earlier, even TAN Sport rubber and Rubber powered props also encourage children a lot. No online indian/LHSs stocks these cheap items. You may reply that transportation would be costlier than it's value, but please remember, these items are purchased in LOTs and generally distributed (not sold) to attract children to this hobby. Even, I have to make different lightweight props.
Again you can say, this improves my cutting and sanding work, but then I have to Thank BSNL for reminding the old days for CROSS-CONNECTION in their telephones. ... Haah.... When we realize fine tuning?  

Thanks guys.. excellent feedback… we will try our best to implement these… and kalyan, we are getting loads of rubber powered models with rubber, props, wheels etc. .etc this month end from Guillows, USA.
Another great news is we have signed off with horizon hobby... spektrum, JR, eflite and other models will be in store in the coming few months time.
Another news is a new model that has just been released worldwide from Hobbico "Uberlite" is also on the way to rcbazaar... http://www.towerhobbies.com/products/hobbico/hcaa2560_e.html.
infact a lot of new models and categories coming to RcBazaar soon.

finally TTT for pre-booking the 9ch tx and 8ch rx at rs 4200/- only...(we already have started getting pre orders for this, awaiting for more)...

Sujju

TTT

Please mail me details of bank account for transfer. I have mailed already.
Today is the last day, so please...

Pm sent. And someone from the store will call you too.

Thanks

We have reached the qty we wanted to. All orders are confirmed. Tomorrow is the last date for all pre-orders

Thanks

Sujju

Thanks for calling and get the details in PM and mail too. Trying to transfer the money and confirm as soon as it will be delivered.

Thanks

Bad Luck once again to me.

I have requested one of my friend to transfer my amount to his and then he transfer through NetBanking from his SBI Online, but he cannot do the same (and also told me that SBI to Axis bank may take 2-3 days for clearing, Then why online i don't know? I am a new to banking process). Useless effort from 2PM to 5PM for transfer.

Again, I have the sufficient Cash amount to deposit , and in Card  to transfer but tomorrow is the Dashera   i. e. holiday in Kolkata . In fact in Kolkata, monday to thrusday, all banks are closed due to durgapuja.

So, though one day is in hand but seems useless to me right now due to holiday.

And RCBazaar confirmed that they have get sufficient orders.

Oh God. why this thing always happens to me  ?  born without luck  !!! Maximum work & Minimum result . When this will end  ?

RCBazaar, Can you suggest some procedure..

Hi Kalyan.
Unfortunately I am traveling so have limited access to net here. Pls pm me you phone number and someone from the store will take care of this. Or better and faster it will be great if you can call the store directly (contacts are in visit the store link on RcBazaar.com) and pls let them know you have discussed this with me. Hope this helps

Sujju

Any update on radio delivery ?

Thanks,

Hiren

to give an update to the forum here
1. guillow kits should be in store by next week

2. other consignment like radios etc are already enroute and will be in by 2 weeks time... (unfortunatley there has been a strike at the chennai port and is still on).. will keep posted here soon

sujju

Thanks Sujju and special thanks to Dilip for that quick update on phone.

Thanks,

Hiren

Sujju / Dilip,

Any update on radio ?

Thanks,

Hiren

Hi Hiren
i had posted an update and have been updating the same in the news section of our website www.rcbazaar.com however here goes
- our container from hong kong has been in chennai from the 3rd week of november (which is around a month now)... we had got intimations from the chennai port container unloading authorities and also our shipping partners that the shipment will be delayed by about a month due to congestion / overload in chennai and also due to weather reason. we have tried to reason with them and even stated that there are perishable items in the container but it had fallen to deaf years.
- Container now is under clearance and we hope to get the same instock in about 10 - 12 days time (as i always say depending on the how happy or unhappy the "Gods of Customs" are with us)
- website products have already been updated but have not been published yet as we dont know the customs, clearance, demurrage or detention charges once this gets cleared we will be able to put them in store and online..
I keep my fingers crossed everyday to get some news and hope this coming week will be better for us.

This is always a risk of conducting import business and i hope and wish that we will start procuring / manufacturing these in india (example: the new models that we plan to launch "Apprentice" is made in India and we are trying our best to maintain the international quality and if we get a good resposne on models like these we will get into procuring all our requirements locally... also with things like these we will never be out of stock) our hunt for local vendors will be on and hope that our country gets into exporting this soon.

Pls do bear with us for another 10-12 days and we will have new stock in store.. to give a brief preview of the new stocks
- motors and mounts
- esc's
- lipos
- helis
- planes (cessna's, TB-20's, sky surfer's, axn floaters, uberlites, 3D foam planes, calmato, ultimate 40, british se5a, Z Spovt and more in ample qty have been ordered)
- foam glues
- loctites
- coverging films
- serovs
- props and adaptors
- transmitters and receivers
- carbon fibre rods
- dle 20 engines
and more on the list is slated to be in...

sujju

if any one interested to sale FS-TH9X 9ch 2.4GHz transmitter & receiver....please reply me...
urgent...............!!!!!

Hi, Sujju.
Have joined the RCIndia only a few days back and thus missed the offer completely . But believe me, I WANT to have the set and want to start afresh . I wonder if something can be done about this. ...so that I can have one... 
essaargee

Hi Sabya, I am interested to buy the Transmitter/Reciever javascript:void(0)

Nice list of products

Thanks Sujju,

Delay is absolutely fine with me. I did read the news on your website but was curious.

Its just the anxiety of getting the new radio to play with. I hope you wont bother me chasing every 2 weeks.

Thanks,

Hiren 

No problems Hiren, you are more then welcome to write anytime and hopefully if we get the stock earlier we will intimate you about this too..

regards
sujju

Huh,

I check everyday for updates. Similar to lots of RCIndians.
The 2.4GHz micro 3 plane combi pack just shown as low stock and exhausted before booking next day.

What a follower list Sujju bhiya and hit count in site.

thanks a lot kalyan... we dint realise that the snap and fly models will be sold out in a matter of hours... infact i see it as a disappointment on us that we dont stock these in very large quantities... yes hit count on the site to be frank has been excellent and what encourages us is that we have been able to get international customers on our site and have been able to send our models to germany, US, middle east, australia, spain etc...

sujju

That is for your choice and your destiny.
We are proud and be happy for your increasing sell volume so that we can get offers and good rates too.

RapidshareSSL is very much helps to attract international confidence and site reliability.
All aeromodellers in software field realize that how serious you are.

And type approval too helps to do the trick.

Sujju bhaiya,
The snap and fly models will be so good for Picnics that all loves that.
Another thing is microBlimps, fishes and other slow fliers that cannot hurt any people.
That is why Micro IR heli is so popular here that available at footpath of India.
But IR will not work far in Sunlight.
I am telling this several times here.

Dear RCFORALL

I'm interested in buying FS-CT6B 6ch 2.4GHz transmitter & receiver, will you please inform me when it could be available?

Thankx.

Greetings Forum Members...
Transmitters with loads of other stock has arrived and will be updated by tomorrow evening... you can see the stocks online from the 1st day of 2012...

I wanted to thank all the members here as RcBazaar has finished 6 and a half months plus in this business of serving you and we hope to continue in the same way if not exceed.

we also have a skype id for our store rcbazaarbangalore. pls feel free to talk to dilip and team to see any models in the store before your purchases. Also you can use skype if you want to see how your goods have been packed before sending to our couriers guys (but before 3pm on working days).

regards
Sujju

  {:)}Thanks sujju Bhaiya , Now its time to buy my first Tx/Rx